Expose new filament to air for as little time as possible
Feed new filament into machine
Print Process
Put a Name and Date Label (printed from the label machine) on the printer so another user can put your print on the Finished Shelf with this label, or so that if the print fails another user can tell you on Slack
Removing the print: use a putty knife with the beveled side up at a very shallow angle, to avoid gouging the print surface.
If you experience problems that you cannot fix while printing, replace the green check mark with a red X. If able, leave a note on the whiteboard of the problem, and post on Slack
Cleaning up tool
Please make sure any bits of filament are thrown in the trash