Tormek T8 Knife and Blade Sharpening

Jump to

1. 0:15Tool overview and manual guidance
2. 0:59Water tray setup and magnet
3. 3:11Explaining included jigs and accessories
4. 5:42Using the stone grater for grit selection
5. 6:42Tool support positions and orientation
6. 8:18Setting up the square edge jig
7. 9:53Setting and checking blade angles
8. 11:48Sharpening chisels and achieving wire edge
9. 16:03Flattening the backside and honing
10. 18:07Proper technique on the honing wheel
11. 19:13Sharpening knives with the jigs
12. 24:51Dialing in angle and sharpening the knife
13. 27:54Honing, burr removal, and finishing
14. 31:14Cleaning and restoring the tool after use

Need the checklist, documentation or quiz? Open the full badge page.