Evenheat Kiln
This kiln can be used for casting, heat treating, forging, enameling, sintering, firing ceramics, etc.
Model: LB 22.5
TAP Control
22.5" Deep x 10" Wide x 6.5" High
2200°F Maximum Temperature
This kiln can be used for casting, heat treating, forging, enameling, sintering, firing ceramics, etc.
Model: LB 22.5
TAP Control
22.5" Deep x 10" Wide x 6.5" High
2200°F Maximum Temperature
A buffer for cars, boats, resin or wood table tops, etc. -Put the terrycloth bonnet on for waxing, and the wool one on for buffing. -Apply wax to the bonnet, not the surface. -Do not push on the buffer as this could burn out the motor. Let it do the work. -Wash the bonnets with soap and water when finished and let dry.
This tool is for putting compound curves in sheet metal.
This tool is used to hold taps straight.
An impact wrench is used when a lot of torque is needed, generally to tighten or loosten large bolts. DCF899.