Equipment and Capabilities

Rooms > Activity Zones > Equipment

MakeHaven uses a system called "badging" to introduce members to how equipment at MakeHaven works. Many pieces of equipment require the member earn a badge before using the equipment. Badges are eared by watching a video, passing a quiz and doing a checkout with someone who already knows the tool. A list of the status of all tools can be found and updated by members at Equipment Status. A list of badges can be found at: Badges

Members may also use our tool lending library .

Offline Tools

Offline for Maintenance

Woodshop Drill Press

Last updated: 1 day 18 hours ago

Offline for Maintenance

VR Headset (Oculus)

Last updated: 1 week 5 days ago

Status: Active
Report Issue	Tabletop Silkscreen Printing Setup This tabletop setup is used to print silkscreens (stencil, burned, or vinyl), and is typically used to print to paper. Requirements: Tabletop Printing with Water Based Inks Badge, Vinyl Silkscreen Creation Badge , Requirements: Tabletop Printing with Water Based Inks Badge, Vinyl Silkscreen Creation Badge
Report Issue	Baratza Encore Coffee Burr Grinder
Report Issue	Cutting Table This large table in the textiles area has a full cutting mat with inch square grid, ideal for cutting textiles, matte board, large printouts, and more.
Report Issue	Pressing Table (Ironing Area) This large pressing area is ideal for garmet work in the textile area.
	Metal Measurement
	Metal Sheetwork
	Portable Metalworking Power Tools
	Woodworking Portable Power Tools
Report Issue	Prusa Mini+ We have 2 Prusa Mini+ 3d Printers. Requirements: 3D Printer Badge
Report Issue	Router Plane Bench Dog Router Plane with Fence, Open Throat Requirements: Fine Woodworking Hand Tools Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Compression Oven Requirements: Precious Plastics Oven Badge
Report Issue	Scale
Report Issue	Fridge (bio)
Report Issue	PH Meter
Report Issue	Evenheat Kiln This kiln can be used for casting, heat treating, forging, enameling, sintering, firing ceramics, etc. Model: LB 22.5 TAP Control 22.5" Deep x 10" Wide x 6.5" High 2200°F Maximum Temperature Requirements: Evenheat Kiln Badge
Report Issue	Acrylic Bender This tool can be used to bend flat pieces of acrylic (PMMA). Requirements: Acrylic Bender Badge
Report Issue	Drill Bit Sharpener
Report Issue	Soldering Irons
Report Issue	Instant Pot
Report Issue	Ice Cream Maker
Report Issue	Stand Mixer
Report Issue	Iron
Report Issue	Pneumatic Impact Wrench Requirements: Pneumatic Metalworking Hand Tools Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Pneumatic Sander Requirements: Pneumatic Metalworking Hand Tools Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Pneumatic Cutoff Wheel Requirements: Pneumatic Metalworking Hand Tools Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Angle Die Grinder Requirements: Pneumatic Metalworking Hand Tools Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Die Grinder Requirements: Pneumatic Metalworking Hand Tools Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Right Angle Drill Requirements: Pneumatic Metalworking Hand Tools Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Pneumatic Hammer Requirements: Pneumatic Metalworking Hand Tools Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Pneumatic Saw 16GA max sheet metal thickness. Requirements: Pneumatic Metalworking Hand Tools Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Pneumatic Shears For cutting sheet metal up to 20 Gauge. Requirements: Pneumatic Metalworking Hand Tools Badge
Report Issue	Pneumatic Nibbler 16 Gauge max thickness (steel or aluminum). Requirements: Pneumatic Metalworking Hand Tools Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Bearing Puller This tool is used for pulling bearings or pulleys off of shafts.
Report Issue	NPT Threading Set This is a set of dies for taper threading pipe.
Report Issue	Tap and Die Set This is a set of taps and dies for metalworking. Link to manufacturer listing: https://www.irwin.com/tools/taps-dies-sets/hanson-75-piece-mach-fractional-metric-plug-tap-and-1-hex-die-set
Report Issue	Pantograph Mill This machine copies an object onto another one using a high speed endmill engraver. Requirements: Pantograph Mill Badge
Report Issue	Darex Endmill Sharpener This is a tool for sharpening endmills. Requirements: Darex Endmill Sharpener Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	DC Stick/Arc Welder Requirements: Stick Welders Badge Welding Gloves , Welding Jacket , Welding Mask , Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Long Pants , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Delta 14" Metal Lathe Requirements: Metal Lathe Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system. , Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Closed-Toe Shoes Closed toed shoes are required.
	Paint and Finishing
Report Issue	Welding / Hot Work Area Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Long Pants , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Printmaking Area
Report Issue	Hand Tools
Report Issue	Measuring Tools
Report Issue	Pneumatic Tools The pneumatic tools include the two nailers and the stapler. Requirements: Air Tools Badge
Report Issue	Electronics Workbenches
Report Issue	Computer Stations Installed Software Area(s) of Use Software Title Description Laser, CNC, Arts Inkscape Vector Design software. Electronics Eagle Circit Design 3d Printing Meshmixer Tools for optimizing model for 3d printing... More
Report Issue	Social Lounge
Report Issue	Print and Digital Design Area
Report Issue	Group Activity Space
Report Issue	Library
Report Issue	Fine Woodworking Handtools Requirements: Fine Woodworking Hand Tools Badge, Tormek Knife Sharpening Badge , Requirements: Fine Woodworking Hand Tools Badge, Tormek Knife Sharpening Badge
Report Issue	Communications and Radio Calling all MakeHaven Hams Tuesday Nights between 6-7 pm is KW1MH Radio Bench Badging Time. If you are a MakeHaven Member and a FCC Licensed Ham Radio Operator make an appointment with Brenda Brown KW1YL. On this website, go to makehaven.org/facilitators or... More Requirements: Radio Badge
Report Issue	Casting and Plastics
Report Issue	Textile and Craft Area
Report Issue	3d Printer Station Computer station for 3d printing, running CNC and 3d scanning. See your print live at: makehaven.org/3dprintercam Requirements: 3D Printer Badge
Report Issue	Laser Cutter Station Requirements: Laser Cutter Badge
Report Issue	Silkscreen Image Burning Station This station is for burning an image from a transparency onto a silkscreen after it has been coated with emulsion and the emusion has dried. Requirements: Screen Burning Badge Badge
Report Issue	Breville Bambino Plus Espresso Machine
Report Issue	JET 20" Planer This is a 5HP 20" wide planer with helical carbide blades. Requirements: Planer Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair.
Report Issue	Induction Forge DO NOT USE THIS TOOL IF YOU HAVE A PACEMAKER. REMOVE ANY JEWELRY ON YOUR HANDS WHILE USING. IF YOU HAVE ANY METAL IMPLANTS, MAKE SURE TO KEEP THEM AWAY FROM THE COILS The induction forge can be used for heating and melting metals. This video goes over how to make your own coils, starting... More Requirements: Induction Forge Badge
Report Issue	Parts Washer This tool is for cleaning metal parts Requirements: Parts Washer Badge Wash Hands , Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	TIG Welder This is an Everlast 250EX. Requirements: TIG Welding Badge Welding Gloves , Welding Jacket , Welding Mask , Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Dell Color Printer: 1320c For color printing. Directly connected to printer station. Use bucket.makehaven.org to transfer files. To preserve formatting and fonts, convert to a PDF. Remember to pay for prints.
Report Issue	Podcast Microphones Two microphones at a table with tv display behind and computer for recording audio.
Report Issue	Vanguard 3400 by Hermes This CNC tool can be used to engrave into metals.
Report Issue	Air Brush Iwata Eclipse HP-CS Gravity Feed Airbrush Requirements: Air Brush Badge
Report Issue	2x72 Belt Grinder Requirements: 2x72 Belt Grinder Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Ultrasonic Cleaner This tool uses ultrasonic vibrations to clean things. Generally you put water and a soap in it, and place the parts to be cleaned in the basket.
Report Issue	Vacuum Chamber This is primarily used for pulling air out of liquids. The pump is located underneath the table.
Report Issue	Soldering Fume Filter For removing the fumes while soldering.
Report Issue	Rework Station FCR 2000 Forced Rework Station
Report Issue	Camera Microscope
Report Issue	Function Generator This is a Siglent SDG1025 Function Generator, for making AC signals.
Report Issue	Wacom Cintiq 24HD This is a 24" Wacom Cintiq 24HD Interactive Pen Display to use for design/drawing.
Report Issue	Vitamix Blender/Food Processor The Vitamix also has a food processor bowl and blades that can be attached.
Report Issue	Vacuum Sealer This tool is for vacuum sealing food. It can be used for sous-vide, preservation, etc.
Report Issue	Tube Roller This tool is used to bend tubes and pipes. Dies can be purchased at https://www.swagoffroad.com/SWAG-Off-Road-Tubing-Roller-Dies-Compatible-With-HULK-or-Harbor-Freight-Tube-Roller-_p_51.html. Requirements: Tube Roller Badge
Report Issue	HQ Simply Sixteen Long Arm Quilter & Frame The HQ Simply Sixteen enables any quilter, beginner to advanced, to finish any size quilt without the space requirements of a conventional frame system. FEATURES Ergonomic front handlebars with touchscreen control 1,800 stitches per minute LED light... More Requirements: Quilter Badge Badge
Report Issue	Anvil This is a 224 pound Peter Wright anvil made in England c.1862—1910 Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Hydraulic Press This is a 20 ton manual hydraulic press. Requirements: Hydraulic Press Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Surface Grinder The surface grinder is used to grind ferrous materials to very precise dimensions. Requirements: Surface Grinder Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair.
Report Issue	Belt and Disc Sander The belt and disc sander is used for sanding in the woodshop. New belts and discs are available in the Store. Requirements: Belt and Disc Sander Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair.
Report Issue	Behmor Coffee Roaster The Behmor 2000AB Plus Roaster was bought with a member fundraiser, and can roast up to 1 pound of coffee. Some notes in addition to the video: P1 is the hottest program, P5 the coolest If you get to the end of the program and haven't heard the first crack, push the + button... More Requirements: Behmor Coffee Roaster Badge
Report Issue	Knitting Machine Brother Electroknit KH-930E. This knitting machine knits simple (stockinette stitches) and complicated patterns up to 3 feet wide (200 stiches) by modifying its needles positions by hand or by programming. Requirements: Knitting Machine Badge Badge
Report Issue	Laboratory Digital Trinocular Microscope
Report Issue	Autoclave Steam Sterilizer
Report Issue	Incubator Requirements: Community Bio Badge
Report Issue	Hood
Report Issue	Centrifuge (Thermo) Requirements: Centrifuge Badge
Report Issue	Centrifuge (Micro 22) Requirements: Centrifuge Badge
Report Issue	Centrifuge (Eppendorf) Requirements: Centrifuge Badge
Report Issue	Epson 40600 Large Format Printer The 64-inch SureColor S40600 features newly-developed Epson UltraChrome® GS3 4-color solvent ink for outstanding print quality, durability, and media compatibility. When combined with an all-new precision media feeding system and a high-performance PrecisionCore® TFP print head, the... More Requirements: Large Format Printer Badge Badge
Report Issue	Shrinker Stretcher
Report Issue	English Wheel This tool is for putting compound curves in sheet metal.
Report Issue	Hand Tapper This tool is used to hold taps straight.
Report Issue	Precious Plastics Oven This oven is for heating materials and pressing them with a pneumatic press. Requirements: Precious Plastics Oven Badge
Report Issue	Surface Plate This is a granite surface that is extremely flat. It is meant as a reference surface for measuring things on, and should not be used as a work table.
Report Issue	FormLabs 3B Resin 3d Printer This is a SLA 3D Printer, which uses light to cure resin in layers. This allows it to get very high resolution. There are a number of resins available, including an engineering grade resin, as well as high-temp resin, appropriate for making injection molds. Build Volume: 14.5 × 14.5... More Requirements: FormLabs 3B Badge
Report Issue	Prusa i3 MK3 We have 2 Prusa i3 MK3S printers. To connect to them at MakeHaven, visit octopi1.makehaven and octopi2.makehaven. Requirements: 3D Printer Badge
Report Issue	Drum Sander This is a Powermatic drum sander that is 22" wide, and can accommodate pieces 44" wide by turning them around. Requirements: Drum Sander Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Metal Chop Saw Requirements: Metal Chop Saw Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system. , Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair.
Report Issue	Necchi HD22 Portable Sewing Machine (1 of 2) Requirements: Sewing Machine Badge
Report Issue	Vinyl Cutter Requirements: Vinyl Silkscreen Creation Badge, Vinyl Cutter Badge , Requirements: Vinyl Silkscreen Creation Badge, Vinyl Cutter Badge
Report Issue	Oxy Acetylene Welder Requirements: Oxy Acetylene Welding Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair.
Report Issue	Plasma Cutter Requirements: Plasma Cutting Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system. , Welding Gloves , Welding Jacket , Welding Mask
Report Issue	10" Metal Drill Press Requirements: Smaller Metal Drill Press Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Water Jet Cutter This tool uses 30,000psi water and abrasive to cut material. The cutting area of the waterjet is 57"x30". Requirements: Waterjet Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	6" x 48" Belt Grinder Requirements: Belt Grinder Large (6" x 48") Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Kalamazoo Belt Grinder, Small (1"x42") Requirements: Belt Grinder Small (1' x 42") Badge Closed-Toe Shoes Closed toed shoes are required. , Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair.
Report Issue	6" Cut Off Saw Requirements: Cut Off Saw Badge Closed-Toe Shoes Closed toed shoes are required. , Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Face Shield , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair.
Report Issue	Heavy Duty Sewing Machine - Sailrite Fabricator Requirements: Fabricator Sewing Machine Badge
Report Issue	Nylon and Chopped Carbon Fiber 3d Printer (Markforged) Requirements: Markforged 3D Printer Badge
Report Issue	Metal Vertical Bandsaw Requirements: Vertical Metal Bandsaw Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system. , Closed-Toe Shoes Closed toed shoes are required. , Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair.
Report Issue	Horizontal Bandsaw This tool is for cutting metal stock to length. It can cut materials mild steel and softer, and it has an automatic feed to make multiple cuts of the same lengths. Requirements: Horizontal Metal Bandsaw Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	30" Shear, Press Brake, and Slip Roll For bending, cutting and rolling sheet metal up to 20 gauge (0.0375") Requirements: Shear Brake Roll Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair.
Report Issue	Bridgeport Mill (Pulley) Requirements: Bridgeport Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system. , Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Bridgeport Mill Variable Speed Requirements: Bridgeport Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system. , Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Long Pants , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Arbor Press Closed-Toe Shoes Closed toed shoes are required. , Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair.
Report Issue	Sand Blaster Cabinet Requirements: Sand Blaster Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	EMCO Metal Lathe This lathe is for metalworking, and uses collets to hold the work. Requirements: Metal Lathe Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system. , Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Comparator Requirements: Comparator Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	20" Metal Drill Press This drill press has 10" between the chuck and the column, giving it 20" of swing. It is for drilling holes in metal. Requirements: Metal Drill Press Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system. , Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair.
Report Issue	Computer Cybersecurity & Privacy Analytic Tools MakeHaven members are increasingly interested in cybersecurity, penetration testing, malware discovery, and software exploits. Privacy-auditing methods, such as static analysis, are intertwined with effective cybersecurity, and also require an understanding of technology such as the Dark Web.... More
Report Issue	Singer 201-2 (Aretha) Sewing Machine Requirements: Sewing Machine Heavy Duty Singers Badge
Report Issue	Homebrew MakeHaven hosts a home brewing community. Join the next community brewing session to learn the craft, enjoy tasting and connect with other brewing enthusiasts. No experience necessary. Check Slack #brewing and makehaven.org/events for upcoming activities. There are 2 badges... More Requirements: Brewing Community Badge
Report Issue	Spray Booth / Fume Hood The 40” Wide Ductless Spray Booth provides a negative-pressure hooded enclosure for fume control. These systems utilize powerful fans and a variety of high-quality filtration media to provide effective source-capture of airborne contaminants. HEPA filtration, and Activated Carbon media help... More Requirements: Fume Hood Badge
Report Issue	Reflow Oven
Report Issue	Studio Etching Press Requirements: Etching Printing Press Badge
Report Issue	Wire Wheel The Wire Wheel uses spinning wire brushes and scotchbrite to deburr, de-rust, and clean parts without removing much metal. Requirements: Wire Wheel Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Food Dehydrator
Report Issue	Popcorn Popper Create satisfying salty snacks with the movie theater style popcorm maker. Requirements: Popcorn Popper Badge
Report Issue	Gerber CNC Router Cutting area of 53.5"x97"x5.5", max spindle speed of 18000rpm and travel speed of 600ipm. Has vacuum hold down, and will be upgraded to have Automatic Tool Changing. Requirements: Gerber CNC Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system.
Report Issue	Ink Printing Press Requirements: Proofing Printing Press Badge
Report Issue	Janome Sewing Machine Requirements: Sewing Machine Badge
Report Issue	Spiegel Sewing Machine Requirements: Sewing Machine Badge
Report Issue	Screen Printing Machine (Silkscreen) This machine allows tshirts and other materials to have 1 to 4 color images added. The machine acts as a jig to help lineup images. This is most commonly used in concert with tools for adding designs to screens and the flash dryer for locking the ink into place. Requirements: Screen Printing with Plastisol & the Flash Dryer Badge
Report Issue	Bench Grinder The bench grinder has abrasive wheels that can be used to grind ferrous (iron containing) metals. Requirements: Bench Grinder Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Tormek T8 The Tormek T8 is a top of the line blade sharpener. It can be used on chesels, planes, kitchen knives, sciessors, etc. Requirements: Tormek Knife Sharpening Badge
Report Issue	Oscillating Spindle Sander Requirements: Spindle Sander Badge
Report Issue	Sliding Compound Miter Saw (aka Wood Chop Saw) Requirements: Compound Miter Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system.
Report Issue	Jointer Requirements: Jointer Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system.
Report Issue	Band Saw Grizzly 16” Grizzly Band Saw G1073, 112" blade Requirements: Band Saw Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system.
Report Issue	Band Saw Laguna Laguna 14SE, 112" blade Requirements: Band Saw Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system.
Report Issue	Singer 15-91 (Beyoncé) Sewing Machine Requirements: Sewing Machine Heavy Duty Singers Badge
Report Issue	Panel Saw The panel saw is used for cutting sheets of wood. Requirements: Panel Saw Badge
Report Issue	Wood Lathe The Wood Lathe spins your work piece, letting you sculpt it with hand held cutting tools. This is a Laguna 24\|36, 3HP lathe. Requirements: Wood Lathe Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system. , Face Shield , Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Injection Molder LNS MODEL 150A
Report Issue	Tormach PCNC 440 Metal Mill This is a computer controlled metal mill. See videos created by the manufacture See example projects Simulate using the mill interface. Requirements: Advanced Metal CNC Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair. , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Router Table Router table, with fine joinery capabilities Requirements: Router Table Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system.
Report Issue	Vacuum Former Molds flat sheets around a mold. Useful for creating costumes, or molds for chocolate and soap as well as many other things. Quick tips on streatching Quick tips on Webbing Learn More- -A good reference with a trouble shooting section at the end is this guide. Requirements: Vacuum Forming Badge
Report Issue	Laser Cutter (60 Watt) Universal Laser Systems x2 We have two of them. They are CO2 based lasers with 60 watts of power. Requirements: Laser Cutter Badge
Report Issue	CNC Embroidery and Sewing Machine (Brother) Requirements: CNC Embroidery Badge
Report Issue	Table Saw The Table Saw is used primarily to rip wood. Requirements: Dado Stack Badge, Table Saw Badge , Requirements: Dado Stack Badge, Table Saw Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system.
Report Issue	HERMs Brewing System Requirements: Master Brewer Badge
Report Issue	Shapeoko Pro CNC A desktop CNC Mill for cutting specific shapes from a variety of materials. Cutting area of 33"x33"x4". Requirements: Shapeoko Mill Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Rod and Flat Bar Bender This tool is clamped in the bench vise and used to bend metal. Up to 3/8" rod or 1/4"x1" flat stock (steel).
Report Issue	Moxon Vise The moxon vise is clamped on to a workbench to hold wood vertically, for easy access to the ends of the boards.
Report Issue	Moxon Vise This portable vise is used to hold boards vertically to offer easy access to the ends.
Report Issue	MakeEasy Spiral Binding Machine, 21-Hole Punch Comb Binder
Report Issue	Mat Cutter This is a Fletcher 2100 Mat Cutter. It lives under the light table in the Casting and Moldmaking area. To assemble it, use the thumb screws to attach the two support arms.
Report Issue	Waffle Cone Maker
Report Issue	Dado Stack Requirements: Dado Stack Badge, Table Saw Badge , Requirements: Dado Stack Badge, Table Saw Badge
Report Issue	Track Saw Requirements: Track Saw Badge
Report Issue	Wood Carving Chisels These are fancy wood carving chisels. Make sure to use and sharpen with care! Requirements: Fine Woodworking Hand Tools Badge
Report Issue	Brace Drill Requirements: Fine Woodworking Hand Tools Badge
Report Issue	Knew Concepts Fret Saw Requirements: Fine Woodworking Hand Tools Badge
Report Issue	Domino Joiner The Festool DF500. Requirements: Domino Joiner Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Dovetail Router Jig
Report Issue	Portable Drill Guide
Report Issue	#7 Stanley Jointer Plane Requirements: Fine Woodworking Hand Tools Badge
Report Issue	Grommet Press Machine
Report Issue	Electrophoresis Chamber
Report Issue	Pipette (Digital)
Report Issue	Thermal Controller
Report Issue	NanoDrop
Report Issue	Heat Blocks
Report Issue	Vortex Mixer Requirements: Community Bio Badge
Report Issue	Stirrers (Magnetic)
Report Issue	Micropipettes
Report Issue	10" Orbital Buffer A buffer for cars, boats, resin or wood table tops, etc. -Put the terrycloth bonnet on for waxing, and the wool one on for buffing. -Apply wax to the bonnet, not the surface. -Do not push on the buffer as this could burn out the motor. Let it do the work. -Wash the bonnets with soap and water when... More
Report Issue	Steamer
Report Issue	Tufting Gun This tool makes rug tufting using yarn. Requirements: Tufting Gun Badge
Report Issue	Spot Welder The spot welder is used for fusing sheet metal. Requirements: Spot Welder Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Oscilloscope, Digital This is a Rigol DS1074, 100 MHz Digital Oscilloscope with 4 channels, 12 Mpts memory
Report Issue	AC Arc/Stick Welder Requirements: Stick Welders Badge Welding Gloves , Welding Jacket , Welding Mask
Report Issue	Handheld Bandsaw Requirements: Handheld Bandsaw Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Secure Loose Items Including sleeves, headphones, hoodie strings, long hair.
Report Issue	Metal Angle Grinder Requirements: Metal Angle Grinder Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system. , Face Shield , Safety Gloves , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Vinyl Heat Press Apply heat-trasnfer vinyl to t-shirts and other textiles. Requirements: Vinyl Heat Press Badge
Report Issue	Serger Sewing Machine Requirements: Serger Badge
Report Issue	Portable Photo Studio Pop up portable photo studio for photographing projects and products up to 25" x 30" x 25"
Report Issue	Makita Belt Sander Requirements: Belt Sander Badge
Report Issue	Grain Mill
Report Issue	Oscillating Multitool
Report Issue	Restorer The restorer is used to sand, remove rust, and brush pith and old surfaces off of wood
Report Issue	Sawzall Requirements: Sawzall Badge
Report Issue	Yeti USB Microphone
Report Issue	Dremels
Report Issue	Spot Thermal Camera
Report Issue	Pressure Cooker Canner 21-1/2-Quart Requirements: Pressure Cooker Canner Badge
Report Issue	Sous-vide System
Report Issue	Quarter Sheet Finishing Sander
Report Issue	4x Random Orbital Sander
Report Issue	Veritas Ripcut Dovetail Saw (14 tpi) Requirements: Fine Woodworking Hand Tools Badge
Report Issue	Veritas Crosscut Carcass Saw (14 tpi) Requirements: Fine Woodworking Hand Tools Badge
Report Issue	Pneumatic Brad Nailer Bostich SB-1850BN 18 Gauge Brad Nailer, takes 5/8" to 2" 18GA straight brads Requirements: Air Tools Badge
Report Issue	Bench Plane No. 6 Requirements: Fine Woodworking Hand Tools Badge
Report Issue	WoodRiver Bench Chisel Set (6-piece) Requirements: Fine Woodworking Hand Tools Badge
Report Issue	Crown 6-inch Try Square Requirements: Fine Woodworking Hand Tools Badge
Report Issue	Stanley No. 92 SweetHeart Shoulder / Chisel Plane Requirements: Fine Woodworking Hand Tools Badge
Report Issue	Pneumatic Finish Nailer Bostich SB-1664FN 16 gauge pneumatic finish nailer, takes 1" to 2.5" 16GA straight nails Requirements: Air Tools Badge
Report Issue	Stanley No. 62 SweetHeart Low Angle Jack Plane Requirements: Fine Woodworking Hand Tools Badge
Report Issue	Stanley No. 4 SweetHeart Smoothing Bench Plane Requirements: Fine Woodworking Hand Tools Badge
Report Issue	Pneumatic Stapler Bostich BTFP71875 Pneumatic Stapler, takes 1/4"-9/16" (6mm to 14mm) 3/8" crown, and 1/2"-5/8" (12-15mm) 18 GA brads Requirements: Air Tools Badge
Report Issue	Stanley No. 60-1/2 SweetHeart Low Angle Block Plane Requirements: Fine Woodworking Hand Tools Badge
Report Issue	Stanley No. 9-1/2 SweetHeart Block Plane Requirements: Fine Woodworking Hand Tools Badge
Report Issue	Miter Spring Clamps
Report Issue	Drill Press Mortising Attachment
Report Issue	Shelf Hole Jig
Report Issue	2 HP Router Requirements: Power Routers Badge
Report Issue	Large Router Requirements: Power Routers Badge
Report Issue	Trim Router Requirements: Power Routers Badge
Report Issue	Edge Lipping Planer The purpose of the edge lipping planer is to bring an edge flush with a surface. The base of the tool rests on the primary surface, and the blades cut the edge down. Requirements: Hand Planer Badge
Report Issue	Hand Planer Requirements: Hand Planer Badge
Report Issue	Biscuit Joiner Requirements: Biscuit Joiner Badge
Report Issue	Assorted Clamps
Report Issue	Wood Steamers
Report Issue	Impact Driver (2x) Milwaukee 1/4" Hex Impact Driver 18V 0-3000 RPM 0-3700 BPM Uses Milwaukee 5.0AH battery pack, CAT.No. 48-11-1850 18V 90Wh
Report Issue	Hammer Drill/Driver (2x) 1/2" Hammer Drill/Driver 0-32,000 BPM 0-550 RPM (Low Speed) 0-2000 RPM (High Speed) Uses Milwaukee 5.0AH battery pack, CAT.No. 48-11-1850 18V 90Wh
Report Issue	Foam Cutter Requirements: Foam Cutter Badge
Report Issue	Ultra Sonic Cleaner
Report Issue	Document Camera
Report Issue	Palette+ 3d Printer Filament Splicer This tool can splice filament to make multicolored prints. Step 1: Slice your multi-color model with Simplify3D or Cura Step 2: Process your .gcode output with Chroma (https://support.mosaicmfg.com/Guide/Chroma+V3.2.2/58) Step 3: Print with Palette+! Requirements: 3D Printer Badge
Report Issue	Casting Pressure Pot (C.A. Technologies) Requirements: Pressure Casting Badge
Report Issue	Panasonic 150p Video Camera (Camcorder)
Report Issue	Button Maker 1 Inch A small machine for the creation of 1" (25mm) buttons.
Report Issue	Button Maker 2 1/4 Inch A 2 1/4 inch (58mm) machine for the creation of buttons.
Report Issue	Circular Saw Requirements: Circular Saw Badge Buddy System Tools identified as requiring the buddy system can not be used alone by a member in the space. Another person who is willing and able to respond in an emergency must be identified, informed and consent that they are acting as a buddy. This buddy must remain in the space and be able to observe if any issue arises. The designated buddy must be able to see and hear their partner in person (not just video). Metal shop buddy must be in the metal shop with opperator. The buddy must inform the member operating the tool if they intend to leave so that the tool operator can stop use of any tools requiring the buddy system.
Report Issue	Rotary Hammer Drill Requirements: Hammer Drill Badge
Report Issue	Truing Stand for Bike Wheels This tool is used to make sure that bicycle wheels are true - all the spokes are balanced and there is no wobble.
Report Issue	Scroll Saw A scroll saw is a small electric saw that is useful for cutting intricate curves in cases where a jigsaw or coping saw is not appropriate. It is somewhat similar to a band saw, but unlike band saws, in which the saw blade is a continuous loop, scroll saws use saw blades similar to those of coping... More
Report Issue	Kinect for Xbox
Report Issue	Power Supply
Report Issue	Multi Meter
Report Issue	Power Supply
Report Issue	MIG Welder This is a Miller Millermatic 211 MIG Welder with Spoolmate 150 aluminum spool gun. Make sure to watch the Spool Gun video at the bottom of this page if you want to use that accessory Requirements: MIG Welding Badge Welding Gloves , Welding Jacket , Welding Mask
Report Issue	Forced Convection Rework Station
Report Issue	Scale (Balance)
Report Issue	Shop Vacs
Report Issue	Jig Saw Requirements: Jig Saw Badge
Report Issue	Angle Grinder Requirements: Wood Angle Grinder Badge
Report Issue	Small Electronic Boards and Components Electronics Prototyping Tools (Arduino, Raspberry Pi, etc.) Platform Description Resources Arduino Uno www.arduino.cc -- Arduino... More
Report Issue	Candle Making Kit
Report Issue	Bottle Cutting Kit You can cut glass bottles into glasses and other useful items.
Report Issue	V-Carve VCarve Pro is a powerful but intuitive software for creating and cutting parts on a CNC Router. VCarve Pro gives you the power to produce complex 2D patterns with profile, pocket, drill and inlay toolpaths, plus gives you the ability to create designs with v-carving textures as well as import... More
Report Issue	Solidworks Soldworks is a professional CAD software. MakeHaven members get free access to Solidworks for Education 2021 to download to their own computer. Download Education Version Instruction: If you are a member login to see instructions or download/access on this page. ... More
Report Issue	Startup Desks A Launchpad for Success Rentable private desks in a makerspace with all the tools you can imagine. Perfect for startups and serious makers. $250* per month your own desk. Makerspace membership included. Month to month. Apply for Desk or... More
Report Issue	Workspace A Launchpad for Success Rentable private work areas in a makerspace with all the tools you can imagine. Perfect for startups and serious makers. $Starting at 350* per month your own work space. Makerspace membership included. Month to month.... More
Report Issue	Learning Studio Room suitable for 6-8 people learn together. Appreciate for impromptu meetings unless previously reserved.
Report Issue	Main Fab Lab Main central area with a wide variety of digital and manual fabrication capablities.
Report Issue	Metal Shop Shop focused on metal work and thermal plastics. Requirements: Metal Shop Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop. , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Wood Shop Full reatured woodworking shop with a range of hand, power and computer controled tools. Requirements: Wood Shop Orientation Badge Eye Protection Eye protection at or surpassing the ANSI Z87.1-2015 standard for specific tools, as well as at all times when in wood or machine shop.
Report Issue	Community Bio Room New tools of biotechnology will change our world. These innovations in biotechnology can improve lives if accessible to everyone. We cultivate a community that democratizes access to biotechnology and brings ethical creativity to biology. The community supports cooperation on biology projects, and... More Requirements: Community Bio Badge Wash Hands , Closed-Toe Shoes Closed toed shoes are required.
Report Issue	Media Studio Room dedicated to audio recording, music production, podcasts, photography and video production.
Report Issue	Kitchen Wash Hands
Report Issue	Welding Fume Collector
Report Issue	Black & White Laser Printer and Scanner, Canon MF632
Report Issue	Presentation Screen
Report Issue	Slop Sink
Report Issue	Jet Air Filter (2x)
Report Issue	Small Jet Dust Collector
Report Issue	Jet Cyclone Dust Collector