Injection Molder

Primary tabs

Status: 

LNS MODEL 150A

Instructions for Use: 

Required Safety Glasses and Gloves.

Manual: https://www.techkits.com/datasheets/BIM_MAN_R3.pdf

Create a mold 

Mold Making Tips: http://www.seattlerobotics.org/encoder/mar97/mold_art/molds.htm

Pre heat the mold to warm to the touch using an electric plate stove (about 130F).

Load pellets. Set temperature for the material. 

PLA = 360F - 375F

For moer materials go to http://plastictroubleshooter.com/ThePlasticTroubleshooter/melt_temps.htm

FAQ at: https://www.techkits.com/pages/faqs/

Video: https://www.techkits.com/collections/videos/

Align the mold. Do a single, fast, strong press. 

With gloves remove mold, check results.

Instructional Video: 
Area of Interest: 
fabrication