Gerber CNC Badge

Prerequisites for Gerber CNC Badging:

1. Prior Experience Required: Before getting certified for the Gerber, members must:
   • Be already badged and experienced on the Shapeoko.
   • Have experience performing operations like through-cuts, engraving, etc.
   • Have completed a minimum of 3 projects on the Shapeoko.
2. Safety Benchmark:
   • Members should have a clean track record with no incidents such as hitting workholding clamps or cutting into the table.

Safety Rules for Gerber CNC Operation:

1. Tape Perimeter Barrier:
   • This barrier must be erected whenever possible when the CNC is in operation.
2. Safety Buddy Requirement:
   • If a member needs to be inside the perimeter for any reason while the tool is powered, they must have a safety buddy present.
3. Emergency Stop (Estop) Usage:
   • The Estop button must be pressed whenever tool changes are made.
4. Stay Attentive:
   • Operators must remain with the machine while it's running. Do not leave it unattended.
5. Responsibility for Others:
   • Operators are responsible for the safety of others in the vicinity.
   • Ensure others are at a safe distance and out of harm's way when the machine is in operation.