MakeHaven Micro Credentials (Badges)
Badges typically have a video and a checkout with someone who already knows the tools to demonstrate what you learned. Some have a quiz you need to pass. That quiz will be listed on that badge's page. Once qualifications for any badge have been met a member can check that off on their website profile. This is a honor based system.
Some badges are marked as inactive because the tools or know how is not already in place. If the badge is inactive it probably means there is a good opportunity to help us figure it all out.
| Badge Video | Steps | Badge Issuer(s) | Tool(s) | |||
|---|---|---|---|---|---|---|
| 1 |
2x72 Belt Grinder
 |
 |
Quiz: 2x72 In person checkout required 15 Minutes |
Coleman Merchant, Darryl Bray, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | 2x72 Belt Grinder | |
| 2 |
Acrylic Bender
 |
This tool consists of a heating element, which heats a sheet of plastic in a line, allowing it to be bent on that line. There is a thermostat on the bottom, but it doesn't change the temperature very... Read more |
 |
Quiz: Acrylic Bender Badge applied after successful quiz |
Acrylic Bender | |
| 3 |
Advanced Metal CNC
 |
This badge is required to use the Tormach PCNC 440. Unlike many other badges this can't be learned in a single session. To earn this badge your options are: 1. Earn both the Shapeoko CNC and the... Read more |
 |
Submit Metal CNC Training and Experience Documentation Quiz: Tormach CNC Submit documentation or complete a workshop Checkout Checklist 120 Minutes |
Alex Murdoch, Christopher Chalsma, Mara Heneks, Nathan Rawling | Tormach PCNC 440 CNC Metal Mill |
| 4 |
Air Brush
 |
 |
Quiz: Air Brush Badge applied after successful quiz 15 Minutes |
Air Brush | ||
| 5 |
Air Tools
 |
 |
Quiz: Pneumatic Tools In person checkout required 5 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Adam Work | Air Compressor (SpeedAire) | |
| 6 |
Air Tools
|
|
Quiz: Pneumatic Tools In person checkout required 5 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Adam Work | Air Compressor | |
| 7 |
Air Tools
|
|
Quiz: Pneumatic Tools In person checkout required 5 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Adam Work | Pneumatic Tools | |
| 8 |
Air Tools
|
|
Quiz: Pneumatic Tools In person checkout required 5 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Adam Work | Pneumatic Stapler | |
| 9 |
Air Tools
|
|
Quiz: Pneumatic Tools In person checkout required 5 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Adam Work | Pneumatic Finish Nailer | |
| 10 |
Air Tools
|
|
Quiz: Pneumatic Tools In person checkout required 5 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Adam Work | Pneumatic Brad Nailer | |
| 11 |
Baby Lock Embroidery
 |
 |
Quiz: Baby Lock Embroidery Machine In person checkout required 45 Minutes |
Lila Khan, Christina Quinonez, Anna Luther, Darcy Canales, Denise McGillicuddy, Young Le | Baby Lock Array Embroidery Machine | |
| 12 |
Band Saw
 |
 |
Quiz: Band Saw In person checkout required 15 Minutes |
Jared Crouch, Adam Work, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette, Michael Hanke, David Holland, Elijah Cohen, Jacob Miller | Band Saw | |
| 13 |
Band Saw
|
|
Quiz: Band Saw In person checkout required 15 Minutes |
Jared Crouch, Adam Work, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette, Michael Hanke, David Holland, Elijah Cohen, Jacob Miller | Band Saw Laguna | |
| 14 |
Band Saw
|
|
Quiz: Band Saw In person checkout required 15 Minutes |
Jared Crouch, Adam Work, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette, Michael Hanke, David Holland, Elijah Cohen, Jacob Miller | Band Saw Grizzly | |
| 15 |
Behmor Coffee Roaster
 |
 |
Quiz: Behmor Coffee Roaster In person checkout required 60 Minutes |
Adam Rendall, Jorge Alfaro-Murillo | Behmor Coffee Roaster | |
| 16 |
Belt and Disc Sander
 |
 |
Quiz: Belt and Disc Sander Badge applied after successful quiz |
Belt and Disc Sander | ||
| 17 |
Belt Grinder Large (6" x 48")
 |
 |
Quiz: Belt Grinder Large In person checkout required Checkout Checklist 15 Minutes |
Christopher Chalsma, Coleman Merchant, Darryl Bray, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | 6" x 48" Belt Grinder | |
| 18 |
Belt Grinder Small (1' x 42")
 |
 |
Quiz: Belt Grinder Small In person checkout required Checkout Checklist 15 Minutes |
Christopher Chalsma, Coleman Merchant, Darryl Bray, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | Kalamazoo Belt Grinder, Small (1"x42") | |
| 19 |
Belt Sander
 |
 |
Quiz: Makita Belt Sander Badge applied after successful quiz |
Makita Belt Sander | ||
| 20 |
Bench Grinder
 |
 |
Quiz: Bench Grinder In person checkout required Checkout Checklist 5 Minutes |
Christopher Chalsma, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling, John Hatch | Bench Grinder | |
| 21 |
Bench Grinder
|
|
Quiz: Bench Grinder In person checkout required Checkout Checklist 5 Minutes |
Christopher Chalsma, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling, John Hatch | Wire Wheel | |
| 22 |
Bench Grinder
|
|
Quiz: Bench Grinder In person checkout required Checkout Checklist 5 Minutes |
Christopher Chalsma, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling, John Hatch | Polishing/Buffing Wheel | |
| 23 |
Bench Grinder
|
|
Quiz: Bench Grinder In person checkout required Checkout Checklist 5 Minutes |
Christopher Chalsma, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling, John Hatch | CBN Bench Grinder | |
| 24 |
Biscuit Joiner
 |
 |
Quiz: Biscuit Joiner Badge applied after successful quiz |
Biscuit Joiner | ||
| 25 |
Blind Stitch Hemmer
 |
 |
Quiz: Blind Stitch Hemmer In person checkout required 30 Minutes |
Regina Bohn, Kristin Peters | Blind Stitch Hemmer | |
| 26 |
Brewing Community
 |
Makers interested in joining this community must be 21 years or older and have attended a beer brewing session at MakeHaven, or have plans to attend soon. As part of the brewing community, makers can... Read more |
Quiz: Brewing Community Badge Quiz Badge applied after successful quiz 180 Minutes |
Liam Doherty-Nicholson | Homebrew | |
| 27 |
Bridgeport
 |
Members, Login to upload documentation. |
 ,  |
Submit Bridgeport Training and Experience Documentation Quiz: Bridgeport Mill In person checkout required Checkout Checklist 60 Minutes |
Christopher Chalsma, Alex Murdoch, Nathan Rawling | Bridgeport Mill Variable Speed |
| 28 |
Bridgeport
|
Members, Login to upload documentation. |
, |
Submit Bridgeport Training and Experience Documentation Quiz: Bridgeport Mill In person checkout required Checkout Checklist 60 Minutes |
Christopher Chalsma, Alex Murdoch, Nathan Rawling | Bridgeport Mill (Pulley) |
| 29 |
Brother CNC Embroidery
 |
 ,  |
Quiz: CNC Embroidery In person checkout required 45 Minutes |
Denise McGillicuddy, Christina Quinonez, Regina Bohn | CNC Embroidery and Sewing Machine (Brother) | |
| 30 |
Brother CNC Embroidery
|
, |
Quiz: CNC Embroidery In person checkout required 45 Minutes |
Denise McGillicuddy, Christina Quinonez, Regina Bohn | Heavy Duty Embroidery Machine | |
| 31 |
Centrifuge
|
 ,  |
Quiz: Centrifuges In person checkout required 15 Minutes |
Kara Papa, Nora Pyenson | Centrifuge (Eppendorf) | |
| 32 |
Centrifuge
|
, |
Quiz: Centrifuges In person checkout required 15 Minutes |
Kara Papa, Nora Pyenson | Centrifuge (Micro 22) | |
| 33 |
Centrifuge
|
, |
Quiz: Centrifuges In person checkout required 15 Minutes |
Kara Papa, Nora Pyenson | Centrifuge (Thermo) | |
| 34 |
Circular Saw
 |
 |
Quiz: Circular Saw In person checkout required 15 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette, Michael Hanke | Circular Saw (gone) | |
| 35 |
Circular Saw
|
|
Quiz: Circular Saw In person checkout required 15 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette, Michael Hanke | Circular Saw | |
| 36 |
Community Bio
 |
This badge requires review and undersanding of the Community Bio Room Policies. |
 ,  |
Quiz: Community Bio Room Basics Badge applied after successful quiz 30 Minutes |
Community Bio Room | |
| 37 |
Community Bio
|
This badge requires review and undersanding of the Community Bio Room Policies. |
, |
Quiz: Community Bio Room Basics Badge applied after successful quiz 30 Minutes |
Vortex Mixer | |
| 38 |
Community Bio
|
This badge requires review and undersanding of the Community Bio Room Policies. |
, |
Quiz: Community Bio Room Basics Badge applied after successful quiz 30 Minutes |
Biological Safety Cabinet | |
| 39 |
Community Bio
|
This badge requires review and undersanding of the Community Bio Room Policies. |
, |
Quiz: Community Bio Room Basics Badge applied after successful quiz 30 Minutes |
Incubator | |
| 40 |
Comparator
 |
This is a Deltronic DH 216 Optical Comparator. |
 |
Quiz: Comparator Badge applied after successful quiz 5 Minutes |
Comparator | |
| 41 |
Compound Miter
 |
 |
Quiz: Compound Miter Saw In person checkout required 15 Minutes |
Jared Crouch, Adam Work, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette, David Holland, Michael Hanke, Elijah Cohen, Jacob Miller | Compound Miter | |
| 42 |
Compound Miter
|
|
Quiz: Compound Miter Saw In person checkout required 15 Minutes |
Jared Crouch, Adam Work, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette, David Holland, Michael Hanke, Elijah Cohen, Jacob Miller | Sliding Compound Miter Saw (aka Wood Chop Saw) | |
| 43 |
Cut Off Saw
 |
 |
Quiz: Cut Off Saw Quiz In person checkout required Checkout Checklist 5 Minutes |
Christopher Chalsma, Coleman Merchant, Darryl Bray, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | 6" Cut Off Saw | |
| 44 |
Dado Stack
|
 |
Quiz: Dado Stack Badge applied after successful quiz 5 Minutes |
Dado Stack | ||
| 45 |
Darex Endmill Sharpener
 |
 |
Quiz: Darex Endmill Sharpener Badge applied after successful quiz 60 Minutes |
Darex Endmill Sharpener | ||
| 46 |
Domino Joiner
 |
 |
Quiz: Domino Joiner Badge applied after successful quiz 15 Minutes |
Domino Joiner | ||
| 47 |
Drum Sander
 |
 |
Quiz: Drum Sander Badge applied after successful quiz 15 Minutes |
Drum Sander | ||
| 48 |
Embroidery Hat Attachment
 |
 |
Quiz: Embroidery Hat Attachment Badge applied after successful quiz |
Embroidery Hat Attachment | ||
| 49 |
Etching Printing Press
 |
 ,  |
Quiz: Etching printing press Badge applied after successful quiz 15 Minutes |
Studio Etching Press | ||
| 50 |
Evenheat Kiln
 |
This badge is appropriate for metalwork only. Ceramics requires the ceramics kiln badge. |
 |
Quiz: Evenheat Kiln Badge applied after successful quiz 15 Minutes |
Evenheat Kiln | |
| 51 |
Fabricator Sewing Machine
 |
 |
Quiz: Fabricator quiz In person checkout required 60 Minutes |
Denise McGillicuddy, Kristin Peters, Lila Khan, Christina Quinonez, Regina Bohn, Anna Luther | Heavy Duty Sewing Machine - Sailrite Fabricator | |
| 52 |
Fine Woodworking Hand Tools
 |
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
 |
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Fine Woodworking Handtools | |
| 53 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Stanley No. 9-1/2 SweetHeart Block Plane | |
| 54 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Stanley No. 60-1/2 SweetHeart Low Angle Block Plane | |
| 55 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Stanley No. 4 SweetHeart Smoothing Bench Plane | |
| 56 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Stanley No. 62 SweetHeart Low Angle Jack Plane | |
| 57 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Stanley No. 92 SweetHeart Shoulder / Chisel Plane | |
| 58 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Crown 6-inch Try Square | |
| 59 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
WoodRiver Bench Chisel Set (6-piece) | |
| 60 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Bench Plane No. 6 | |
| 61 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Veritas Crosscut Carcass Saw (14 tpi) | |
| 62 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Veritas Ripcut Dovetail Saw (14 tpi) | |
| 63 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Router Plane | |
| 64 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
#7 Stanley Jointer Plane | |
| 65 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Knew Concepts Fret Saw | |
| 66 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Brace Drill | |
| 67 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Wood Carving Chisels | |
| 68 |
Fine Woodworking Hand Tools
|
This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp. |
|
Quiz: Fine Woodworking Hand Tools Badge applied after successful quiz |
Panel Gauge | |
| 69 |
Flexshaft
 |
 |
Quiz: Flex Shaft Badge applied after successful quiz |
Foredom Flexshaft | ||
| 70 |
Foam Cutter
 |
 ,  ,  ,  ,  ,  |
Quiz: Foam Cutter Badge applied after successful quiz 15 Minutes |
Julia Murphy | Foam Cutter | |
| 71 |
FormLabs 3B
 |
 |
Quiz: FormLabs 3B In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Nathan Rawling, Tyler Young, Anna Luther | FormLabs 3B Resin 3d Printer | |
| 72 |
Fume Hood
 |
Quiz: Fume Hood Quiz Badge applied after successful quiz |
Spray Booth / Fume Hood | |||
| 73 |
Gerber CNC
 |
Prerequisites for Gerber CNC Badging: Prior Experience Required: Before getting certified for the Gerber, members must: Be already badged and experienced on the Shapeoko. Have experience performing... Read more |
 |
Quiz: Gerber CNC Router In person checkout required 180 Minutes |
Walker Fuchs, Adam Work | Gerber CNC Router |
| 74 |
Hammer Drill
 |
The Rotary Hammer Drill is used to drill into stone, concrete, and brick. It uses SDS-Plus bits (located in the container next to the drill), which have a carbide tip. This tip is very hard, not... Read more |
Quiz: Hammer Drill Badge applied after successful quiz |
Rotary Hammer Drill (gone) | ||
| 75 |
Hammer Drill
|
The Rotary Hammer Drill is used to drill into stone, concrete, and brick. It uses SDS-Plus bits (located in the container next to the drill), which have a carbide tip. This tip is very hard, not... Read more |
Quiz: Hammer Drill Badge applied after successful quiz |
Rotary Hammer Drill | ||
| 76 |
Hand Planer
 |
 |
Quiz: Hand Planer In person checkout required 5 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette, Michael Hanke | Hand Planer (gone) | |
| 77 |
Hand Planer
|
|
Quiz: Hand Planer In person checkout required 5 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette, Michael Hanke | Edge Lipping Planer | |
| 78 |
Hand Planer
|
|
Quiz: Hand Planer In person checkout required 5 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette, Michael Hanke | Hand Planer | |
| 79 |
Handheld Bandsaw
 |
 |
Quiz: Hand Held Band Saw In person checkout required 15 Minutes |
Christopher Chalsma, Coleman Merchant, Darryl Bray, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | Handheld Bandsaw | |
| 80 |
Horizontal Metal Bandsaw
 |
 |
Quiz: Horizontal Band Saw In person checkout required 15 Minutes |
Christopher Chalsma, Coleman Merchant, Darryl Bray, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | Horizontal Bandsaw | |
| 81 |
Hydraulic Press
 |
Quiz: Hydraulic Press Badge applied after successful quiz |
Hydraulic Press | |||
| 82 |
Induction Forge
 |
 |
Quiz: Induction Forge In person checkout required 30 Minutes |
Christopher Chalsma, Mara Heneks, Nathan Rawling, Elana Abrams, John Hatch | Induction Forge | |
| 83 |
Jewelry
 |
This badge is required to use the Jewelry Area. Within the Jewelry Area there are a few other badges, including the Flex-Shaft, Vacuum Casting Machine, and Wax Work. Intro to Jewelry Making Classes... Read more |
 |
Quiz: Jewelry Area In person checkout required 30 Minutes |
Ada Wilderman, Elana Abrams, Lisa Krasnow | Jewelry Area |
| 84 |
Jewelry Acetylene Torch
|
 |
Quiz: Jewelry Acetylene Torch In person checkout required 30 Minutes |
Lisa Krasnow, Jeremy Stenbak | Jewelry Acetylene Torch | |
| 85 |
Jig Saw
 |
 |
Quiz: Jig Saw Badge applied after successful quiz |
Jig Saw (gone) | ||
| 86 |
Jig Saw
|
|
Quiz: Jig Saw Badge applied after successful quiz |
Jig Saw | ||
| 87 |
Jointer
 |
 |
Quiz: Jointer In person checkout required 15 Minutes |
Mike Lockett, Walker Fuchs, Adam Work, Jorge Alfaro-Murillo, Glenn Mallette, Michael Hanke, David Holland, Elijah Cohen, Jacob Miller | Jointer | |
| 88 |
Kaya Cast Vacuum Machine
 |
 |
Quiz: Kaya Cast Badge applied after successful quiz |
Kaya Cast Vacuum Casting Machine | ||
| 89 |
Knitting Machine Badge
 |
In person checkout required 30 Minutes |
Denise McGillicuddy, Anna Luther, Young Le | Knitting Machine | ||
| 90 |
Large Format Printer Badge
 |
 |
Quiz: Large Format Printer Quiz In person checkout required 60 Minutes |
Ruby Gonzalez Hernandez, Bob McGonigle, Young Le, Emma Vannorsdall | Epson 40600 Large Format Printer | |
| 91 |
Laser Cutter
 |
For info on using the Epilog, see https://www.youtube.com/watch?v=4TaAvGx8crc |
 |
Quiz: Laser Cutter Quiz In person checkout required 60 Minutes |
Adam Work, Carrington Ward, Jiyoun Chang, Stephen Cebik, Janene Holland, Sean Bender, Darcy Canales | Laser Cutter (Universal Laser Systems) |
| 92 |
Laser Cutter
|
For info on using the Epilog, see https://www.youtube.com/watch?v=4TaAvGx8crc |
|
Quiz: Laser Cutter Quiz In person checkout required 60 Minutes |
Adam Work, Carrington Ward, Jiyoun Chang, Stephen Cebik, Janene Holland, Sean Bender, Darcy Canales | Epilog Laser Cutter |
| 93 |
Laser Cutter
|
For info on using the Epilog, see https://www.youtube.com/watch?v=4TaAvGx8crc |
|
Quiz: Laser Cutter Quiz In person checkout required 60 Minutes |
Adam Work, Carrington Ward, Jiyoun Chang, Stephen Cebik, Janene Holland, Sean Bender, Darcy Canales | Laser Cutter Station |
| 94 |
Laser Cutter
|
For info on using the Epilog, see https://www.youtube.com/watch?v=4TaAvGx8crc |
|
Quiz: Laser Cutter Quiz In person checkout required 60 Minutes |
Adam Work, Carrington Ward, Jiyoun Chang, Stephen Cebik, Janene Holland, Sean Bender, Darcy Canales | 32"x 18" ULS Laser Cutter (60 Watt) x2 |
| 95 |
Laser Cutter
|
For info on using the Epilog, see https://www.youtube.com/watch?v=4TaAvGx8crc |
|
Quiz: Laser Cutter Quiz In person checkout required 60 Minutes |
Adam Work, Carrington Ward, Jiyoun Chang, Stephen Cebik, Janene Holland, Sean Bender, Darcy Canales | 24"x 18" ULS Laser Cutter (60 Watt, V460) |
| 96 |
Markforged 3D Printer
 |
 |
Quiz: Markforged In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Nathan Rawling, Tyler Young, Anna Luther | Nylon and Chopped Carbon Fiber 3d Printer (Markforged) | |
| 97 |
Master Brewer
 |
 |
Quiz: Brewing Quiz In person checkout required 30 Minutes |
Liam Doherty-Nicholson | HERMs Brewing System | |
| 98 |
Media Room
 |
 |
Quiz: Media Room Badge applied after successful quiz |
Media Studio | ||
| 99 |
Media Room
|
|
Quiz: Media Room Badge applied after successful quiz |
Podcast Microphones | ||
| 100 |
Media Room
|
|
Quiz: Media Room Badge applied after successful quiz |
Media Backdrops | ||
| 101 |
Media Room
|
|
Quiz: Media Room Badge applied after successful quiz |
Shure KSM27 Microphone | ||
| 102 |
Media Room
|
|
Quiz: Media Room Badge applied after successful quiz |
Focusrite Scarlett 18i8 3rd Gen USB Audio Interface | ||
| 103 |
Media Room
|
|
Quiz: Media Room Badge applied after successful quiz |
Launchpad X Grid Controller | ||
| 104 |
Media Room
|
|
Quiz: Media Room Badge applied after successful quiz |
Media Headphones | ||
| 105 |
Media Room
|
|
Quiz: Media Room Badge applied after successful quiz |
Soft Box Lights | ||
| 106 |
Metal Angle Grinder
 |
 |
Quiz: Metal Angle Grider In person checkout required 15 Minutes |
Christopher Chalsma, Coleman Merchant, Darryl Bray, Elana Abrams, Mara Heneks, Alex Murdoch, Nathan Rawling, John Hatch | Metal Angle Grinders | |
| 107 |
Metal Chop Saw
 |
 |
Quiz: Metal Chop Saw In person checkout required 15 Minutes |
Christopher Chalsma, Coleman Merchant, Darryl Bray, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | Metal Chop Saw | |
| 108 |
Metal Drill Press
 |
 |
Quiz: Large Metal Drill Press In person checkout required Checkout Checklist 30 Minutes |
Christopher Chalsma, Darryl Bray, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | 20" Metal Drill Press | |
| 109 |
Metal Lathe
 |
 |
Submit Metal Lathe Training and Experience Documentation Quiz: Metal Lathes In person checkout required Checkout Checklist 120 Minutes |
Christopher Chalsma, Darryl Bray, Alex Murdoch, Nathan Rawling | Delta 14" Metal Lathe | |
| 110 |
Metal Lathe
|
|
Submit Metal Lathe Training and Experience Documentation Quiz: Metal Lathes In person checkout required Checkout Checklist 120 Minutes |
Christopher Chalsma, Darryl Bray, Alex Murdoch, Nathan Rawling | EMCO Metal Lathe | |
| 111 |
Metal Shop
 |
 |
Quiz: Metal Shop Badge applied after successful quiz |
Metal Shop | ||
| 112 |
MIG Welding
 |
 |
Quiz: MIG Welding In person checkout required 30 Minutes |
Christopher Chalsma, Elana Abrams, Mara Heneks, Alex Murdoch, Nathan Rawling, John Hatch | MIG Welder | |
| 113 |
Mortiser
 |
 |
Quiz: Mortiser Badge applied after successful quiz |
Mortiser | ||
| 114 |
Oxy Acetylene Welding
 |
 |
Quiz: Oxy-Acetylene In person checkout required 30 Minutes |
Jared Crouch, Christopher Chalsma, Mara Heneks, Nathan Rawling, John Hatch | Oxy Acetylene Welder | |
| 115 |
Panel Saw
 |
 |
Quiz: Panel Saw In person checkout required 5 Minutes |
Jared Crouch, Glenn Mallette, Mike Lockett, Walker Fuchs, Adam Work, Jorge Alfaro-Murillo | Panel Saw | |
| 116 |
Parts Washer
|
 |
Quiz: Parts Washer Badge applied after successful quiz |
Parts Washer | ||
| 117 |
Pizza Oven
 |
 |
Quiz: Pizza Oven Badge applied after successful quiz |
Pizza Oven | ||
| 118 |
Planer
 |
 |
Quiz: Planer In person checkout required 5 Minutes |
Glenn Mallette, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Adam Work, Michael Hanke, David Holland, Elijah Cohen, Jacob Miller | Planer | |
| 119 |
Planer
|
|
Quiz: Planer In person checkout required 5 Minutes |
Glenn Mallette, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Adam Work, Michael Hanke, David Holland, Elijah Cohen, Jacob Miller | Planer Dewalt | |
| 120 |
Planer
|
|
Quiz: Planer In person checkout required 5 Minutes |
Glenn Mallette, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Adam Work, Michael Hanke, David Holland, Elijah Cohen, Jacob Miller | JET 20" Planer | |
| 121 |
Plasma Cutting
 |
 |
Quiz: Plasma Cutter In person checkout required 5 Minutes |
Darryl Bray, Alex Murdoch, Christopher Chalsma, Nathan Rawling | Plasma Cutter | |
| 122 |
Plastic Shredder
 |
 |
Quiz: Plastic Shredder Badge applied after successful quiz |
Plastics Shredder | ||
| 123 |
Pneumatic Metalworking Hand Tools
 |
This badge is for the pneumatic hand tools in the metal shop |
 |
Quiz: Metalshop Pneumatic Hand Tools In person checkout required 5 Minutes |
Christopher Chalsma, Coleman Merchant, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | Pneumatic Nibbler |
| 124 |
Pneumatic Metalworking Hand Tools
|
This badge is for the pneumatic hand tools in the metal shop |
|
Quiz: Metalshop Pneumatic Hand Tools In person checkout required 5 Minutes |
Christopher Chalsma, Coleman Merchant, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | Pneumatic Shears |
| 125 |
Pneumatic Metalworking Hand Tools
|
This badge is for the pneumatic hand tools in the metal shop |
|
Quiz: Metalshop Pneumatic Hand Tools In person checkout required 5 Minutes |
Christopher Chalsma, Coleman Merchant, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | Pneumatic Saw |
| 126 |
Pneumatic Metalworking Hand Tools
|
This badge is for the pneumatic hand tools in the metal shop |
|
Quiz: Metalshop Pneumatic Hand Tools In person checkout required 5 Minutes |
Christopher Chalsma, Coleman Merchant, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | Pneumatic Hammer |
| 127 |
Pneumatic Metalworking Hand Tools
|
This badge is for the pneumatic hand tools in the metal shop |
|
Quiz: Metalshop Pneumatic Hand Tools In person checkout required 5 Minutes |
Christopher Chalsma, Coleman Merchant, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | Right Angle Drill |
| 128 |
Pneumatic Metalworking Hand Tools
|
This badge is for the pneumatic hand tools in the metal shop |
|
Quiz: Metalshop Pneumatic Hand Tools In person checkout required 5 Minutes |
Christopher Chalsma, Coleman Merchant, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | Die Grinder |
| 129 |
Pneumatic Metalworking Hand Tools
|
This badge is for the pneumatic hand tools in the metal shop |
|
Quiz: Metalshop Pneumatic Hand Tools In person checkout required 5 Minutes |
Christopher Chalsma, Coleman Merchant, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | Angle Die Grinder |
| 130 |
Pneumatic Metalworking Hand Tools
|
This badge is for the pneumatic hand tools in the metal shop |
|
Quiz: Metalshop Pneumatic Hand Tools In person checkout required 5 Minutes |
Christopher Chalsma, Coleman Merchant, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | Pneumatic Cutoff Wheel |
| 131 |
Pneumatic Metalworking Hand Tools
|
This badge is for the pneumatic hand tools in the metal shop |
|
Quiz: Metalshop Pneumatic Hand Tools In person checkout required 5 Minutes |
Christopher Chalsma, Coleman Merchant, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | Pneumatic Sander |
| 132 |
Popcorn Popper
 |
This badge allows you to operate the popcorn machine. |
Quiz: Popcorn Popper Badge applied after successful quiz |
Popcorn Popper | ||
| 133 |
Pottery
 |
 |
Quiz: Pottery In person checkout required 60 Minutes |
Ericka Saracho, Alex Zak, Akari Roudebush, Maya Dunn | Pottery/Ceramics Studio | |
| 134 |
Pottery
|
|
Quiz: Pottery In person checkout required 60 Minutes |
Ericka Saracho, Alex Zak, Akari Roudebush, Maya Dunn | Pottery Wheel | |
| 135 |
Pottery Kiln
 |
|
Quiz: Pottery Kiln In person checkout required 30 Minutes |
Ericka Saracho, Alex Zak, Akari Roudebush, Maya Dunn | Pottery Kiln | |
| 136 |
Pottery Kiln
|
|
Quiz: Pottery Kiln In person checkout required 30 Minutes |
Ericka Saracho, Alex Zak, Akari Roudebush, Maya Dunn | Pottery/Ceramics Studio | |
| 137 |
Power Routers
 |
 |
Quiz: Hand Routers In person checkout required 15 Minutes |
Jared Crouch, Jen Fremd, Adam Work, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Michael Hanke | Trim Router (gone) | |
| 138 |
Power Routers
|
|
Quiz: Hand Routers In person checkout required 15 Minutes |
Jared Crouch, Jen Fremd, Adam Work, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Michael Hanke | Large Router | |
| 139 |
Power Routers
|
|
Quiz: Hand Routers In person checkout required 15 Minutes |
Jared Crouch, Jen Fremd, Adam Work, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Michael Hanke | 2 HP Router (gone) | |
| 140 |
Power Routers
|
|
Quiz: Hand Routers In person checkout required 15 Minutes |
Jared Crouch, Jen Fremd, Adam Work, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Michael Hanke | 2HP Plunge Router | |
| 141 |
Power Routers
|
|
Quiz: Hand Routers In person checkout required 15 Minutes |
Jared Crouch, Jen Fremd, Adam Work, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Michael Hanke | Large Router | |
| 142 |
Power Routers
|
|
Quiz: Hand Routers In person checkout required 15 Minutes |
Jared Crouch, Jen Fremd, Adam Work, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Michael Hanke | Compact Trim Router | |
| 143 |
Precious Plastics Oven
 |
The primary safety concerns with this tool are the following: -Burns from the oven. There are multiple heating elements in this oven, including the platten. Be careful about touching them, and be... Read more |
Quiz: Precious Plastics Oven Badge applied after successful quiz |
Precious Plastics Oven | ||
| 144 |
Precious Plastics Oven
|
The primary safety concerns with this tool are the following: -Burns from the oven. There are multiple heating elements in this oven, including the platten. Be careful about touching them, and be... Read more |
Quiz: Precious Plastics Oven Badge applied after successful quiz |
Compression Oven | ||
| 145 |
Pressure Casting
 |
 |
Quiz: Pressure Casting Pot In person checkout required 30 Minutes |
Julia Murphy | Casting Pressure Pot (C.A. Technologies) | |
| 146 |
Pressure Casting
|
|
Quiz: Pressure Casting Pot In person checkout required 30 Minutes |
Julia Murphy | Vacuum Chamber | |
| 147 |
Pressure Cooker Canner
|
 |
Quiz: Pressure Cooker Canner Badge applied after successful quiz |
Pressure Cooker Canner 21-1/2-Quart | ||
| 148 |
Proofing Printing Press
 |
 |
Quiz: Ink Printing Press In person checkout required 10 Minutes |
Irene Michnicki, Austin Larkin | Ink Printing Press | |
| 149 |
Prusa 3D Printers
 |
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
 |
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | 3d Printer |
| 150 |
Prusa 3D Printers
|
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
|
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | Makerbot Replicator 2 |
| 151 |
Prusa 3D Printers
|
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
|
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | PowerSpec Dual Head 3d Printer |
| 152 |
Prusa 3D Printers
|
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
|
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | 3d Printer Station |
| 153 |
Prusa 3D Printers
|
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
|
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | Monoprice Select Plus 3d Printer (printer #5) |
| 154 |
Prusa 3D Printers
|
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
|
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | Palette+ 3d Printer Filament Splicer |
| 155 |
Prusa 3D Printers
|
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
|
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | 3d Printer AFP 512 (printer #1) |
| 156 |
Prusa 3D Printers
|
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
|
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | Monoprice Mini (printer #4) |
| 157 |
Prusa 3D Printers
|
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
|
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | GeeeTech Delta Printer (Printer #Unassigned) |
| 158 |
Prusa 3D Printers
|
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
|
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | Monoprice Mini (Printer #3) |
| 159 |
Prusa 3D Printers
|
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
|
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | Monoprice Mini (printer #2) |
| 160 |
Prusa 3D Printers
|
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
|
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | Monoprice Select (printer #7) |
| 161 |
Prusa 3D Printers
|
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
|
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | Prusa i3 MK3 |
| 162 |
Prusa 3D Printers
|
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
|
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | Prusa Mini+ |
| 163 |
Prusa 3D Printers
|
Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers. |
|
Quiz: 3D Printers In person checkout required 30 Minutes |
Adam Rendall, Carrington Ward, Colin Bunting, Michael Lerch, Anna Luther, Nathan Rawling, Tyler Young, Darcy Canales, Sean Bender | Prusa XL 3D Printer |
| 164 |
Quilter Badge
 |
Learn to use the quilter! Don't panic at the number of videos. These are short, instructional pieces outlining steps. The total of the videos is just over a half hour. |
 ,  ,  ,  ,  ,  ,  ,  ,  ,  |
Quiz: Quilter Quiz In person checkout required 60 Minutes |
Denise McGillicuddy, Kristin Peters | HQ Simply Sixteen Long Arm Quilter & Frame |
| 165 |
Radio
 |
To get this badge, you must already have your FCC Radio License (Technician or higher). If you have this, you can take the quiz and schedule an appointment to get checked out to get access to the... Read more |
Quiz: Radio Bench In person checkout required 60 Minutes |
Brenda Brown | Communications and Radio | |
| 166 |
Router Table
 |
 |
Quiz: Router Table In person checkout required 30 Minutes |
Jared Crouch, Jen Fremd, Adam Work, Mike Lockett, Walker Fuchs, Glenn Mallette, Jorge Alfaro-Murillo, Michael Hanke, David Holland | Router Table | |
| 167 |
Router Table
|
|
Quiz: Router Table In person checkout required 30 Minutes |
Jared Crouch, Jen Fremd, Adam Work, Mike Lockett, Walker Fuchs, Glenn Mallette, Jorge Alfaro-Murillo, Michael Hanke, David Holland | Router Table | |
| 168 |
Sand Blaster
 |
 |
Quiz: Sand Blaster Badge applied after successful quiz 15 Minutes |
Sand Blaster Cabinet | ||
| 169 |
Sawzall
 |
 |
Quiz: Sawzall In person checkout required 5 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette, Michael Hanke | Sawzall (gone) | |
| 170 |
Sawzall
|
|
Quiz: Sawzall In person checkout required 5 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette, Michael Hanke | Reciprocating Saw (Sawzall) | |
| 171 |
Screen Burning
 |
Badge required to use the silkscreen screen burning unit in the printmaking area. |
 |
Quiz: Silkscreen Image Burning Station In person checkout required 30 Minutes |
Irene Michnicki, Michelle Wickham, Jesse Peck, Austin Larkin | Silkscreen/Printmaking Image Burning Station |
| 172 |
Screen Burning
|
Badge required to use the silkscreen screen burning unit in the printmaking area. |
|
Quiz: Silkscreen Image Burning Station In person checkout required 30 Minutes |
Irene Michnicki, Michelle Wickham, Jesse Peck, Austin Larkin | Silkscreen Vacuum Exposure Unit |
| 173 |
Screen Printing with Plastisol & the Flash Dryer
 |
This badge allows you to use the T-shirt platen and flash dryer with plastisol ink. |
 |
Quiz: Screen Printing with Plastisol & the Flash Dryer In person checkout required 60 Minutes |
Irene Michnicki, Michelle Wickham, Jesse Peck, Austin Larkin | Screen Printing Machine (Silkscreen) |
| 174 |
Scroll Saw
 |
 |
Quiz: Scroll Saw Badge applied after successful quiz |
Scroll Saw | ||
| 175 |
Serger
 |
 |
Quiz: Serger Quiz In person checkout required 60 Minutes |
Denise McGillicuddy, Kristin Peters, Regina Bohn, Anna Luther | Serger Sewing Machine | |
| 176 |
Sewing Machine
 |
 |
Quiz: Sewing Machine In person checkout required 60 Minutes |
Denise McGillicuddy, Kristin Peters, Lila Khan, Christina Quinonez, Regina Bohn, Anna Luther | Sewing Machine (Kenmore) | |
| 177 |
Sewing Machine
|
|
Quiz: Sewing Machine In person checkout required 60 Minutes |
Denise McGillicuddy, Kristin Peters, Lila Khan, Christina Quinonez, Regina Bohn, Anna Luther | Spiegel Sewing Machine | |
| 178 |
Sewing Machine
|
|
Quiz: Sewing Machine In person checkout required 60 Minutes |
Denise McGillicuddy, Kristin Peters, Lila Khan, Christina Quinonez, Regina Bohn, Anna Luther | Janome Sewing Machine | |
| 179 |
Sewing Machine
|
|
Quiz: Sewing Machine In person checkout required 60 Minutes |
Denise McGillicuddy, Kristin Peters, Lila Khan, Christina Quinonez, Regina Bohn, Anna Luther | Viking Husqvarna Sewing Machine | |
| 180 |
Sewing Machine
|
|
Quiz: Sewing Machine In person checkout required 60 Minutes |
Denise McGillicuddy, Kristin Peters, Lila Khan, Christina Quinonez, Regina Bohn, Anna Luther | Necchi HD22 Portable Sewing Machine (1 of 2) | |
| 181 |
Sewing Machine
|
|
Quiz: Sewing Machine In person checkout required 60 Minutes |
Denise McGillicuddy, Kristin Peters, Lila Khan, Christina Quinonez, Regina Bohn, Anna Luther | Necchi HD22 Portable Sewing Machine (2 of 2) | |
| 182 |
Sewing Machine Heavy Duty Singers
 |
Badge for classic heavy duty Singer sewing machines |
 |
Quiz: Heavy Duty Singer Sewing Machine Quiz In person checkout required 60 Minutes |
Kristin Peters, Regina Bohn, Anna Luther | Singer 15-91 (Beyoncé) Sewing Machine |
| 183 |
Sewing Machine Heavy Duty Singers
|
Badge for classic heavy duty Singer sewing machines |
|
Quiz: Heavy Duty Singer Sewing Machine Quiz In person checkout required 60 Minutes |
Kristin Peters, Regina Bohn, Anna Luther | Singer 201-2 (Aretha) Sewing Machine |
| 184 |
Shapeoko Mill
 |
Required to use the Shapeoko Mill Quick Notes: Functional working surface = 33” X, 33” Y, 4” Z travel Accepts bits with 1/4” & 1/8” collet Not web based like old model, you need to bring files... Read more |
 |
Quiz: Shapeoko CNC In person checkout required 60 Minutes |
Jen Fremd, Adam Work, Walker Fuchs, David Holland, Darcy Canales | Shapeoko Pro CNC |
| 185 |
Shear Brake Roll
 |
 |
Quiz: Shear, Brake, Roll Badge applied after successful quiz |
30" Shear, Press Brake, and Slip Roll | ||
| 186 |
Smaller Metal Drill Press
|
 |
Quiz: 10" Metal Drill Press Badge applied after successful quiz |
10" Metal Drill Press | ||
| 187 |
Soldering Fundamentals
 |
Has learned best practices for soldering and practiced hands on soldering.. |
Quiz: Soldering Fundamentals Badge Badge applied after successful quiz |
|||
| 188 |
Spindle Sander
 |
 |
Quiz: Spindle Sander Badge applied after successful quiz |
Oscillating Spindle Sander | ||
| 189 |
Spot Welder
 |
 |
Quiz: Spot Welder Badge applied after successful quiz |
Spot Welder | ||
| 190 |
Stained Glass
|
 |
Quiz: Stained Glass Badge applied after successful quiz |
Stained Glass Area | ||
| 191 |
Stick Welders
 |
 |
Quiz: Stick Welders In person checkout required 30 Minutes |
Christopher Chalsma, Jared Crouch, Mara Heneks, Elana Abrams, Nathan Rawling, John Hatch | AC Arc/Stick Welder | |
| 192 |
Stick Welders
|
|
Quiz: Stick Welders In person checkout required 30 Minutes |
Christopher Chalsma, Jared Crouch, Mara Heneks, Elana Abrams, Nathan Rawling, John Hatch | DC Stick/Arc Welder | |
| 193 |
Surface Grinder
 |
 |
Quiz: Surface Grinder In person checkout required 15 Minutes |
Christopher Chalsma, Elana Abrams, Alex Murdoch, Nathan Rawling | Surface Grinder | |
| 194 |
Table Saw
 |
 |
Quiz: Table Saw In person checkout required 15 Minutes |
Jared Crouch, Adam Work, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette, Michael Hanke, Elijah Cohen, Jacob Miller | Table Saw | |
| 195 |
Table Saw
|
|
Quiz: Table Saw In person checkout required 15 Minutes |
Jared Crouch, Adam Work, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette, Michael Hanke, Elijah Cohen, Jacob Miller | Dado Stack | |
| 196 |
Tabletop Printing with Water Based Inks
 |
This badge allows you to use the tabletop printmaking setup with water-based (eg acrylic) inks. To use plastisol inks and the flash dryer, you need to get that badge. |
 |
Quiz: Tabletop Silkscreen Printing Badge applied after successful quiz |
Tabletop Silkscreen Printing Setup | |
| 197 |
TIG Welding
 |
 |
Quiz: TIG Welder In person checkout required 60 Minutes |
Christopher Chalsma, Jared Crouch, Elana Abrams, Nathan Rawling, John Hatch | TIG Welder | |
| 198 |
TIG Welding
|
|
Quiz: TIG Welder In person checkout required 60 Minutes |
Christopher Chalsma, Jared Crouch, Elana Abrams, Nathan Rawling, John Hatch | TIG Welder | |
| 199 |
Tile Saw
 |
 |
Quiz: Tile Saw Badging Quiz Badge applied after successful quiz |
|||
| 200 |
Tormek Knife Sharpening
 |
 |
Quiz: Tormek Badge applied after successful quiz |
Tormek T8 Knife and Blade Sharpening | ||
| 201 |
Tormek Knife Sharpening
|
|
Quiz: Tormek Badge applied after successful quiz |
Fine Woodworking Handtools | ||
| 202 |
Track Saw
 |
 |
Quiz: Track Saw Badge applied after successful quiz |
Track Saw | ||
| 203 |
Tube Roller
 |
 |
Quiz: Tube Roller Badge applied after successful quiz |
Tube Roller | ||
| 204 |
Tufting Gun
 |
Learn to use the tufting guns to make a customized rug. |
 |
Quiz: Tufting Gun Quiz In person checkout required 15 Minutes |
Lila Khan, Anna Luther, Akari Roudebush | Tufting Gun |
| 205 |
Vacuum Forming
 |
Read the manual. |
Quiz: Vacuum Former In person checkout required 30 Minutes |
Alex Murdoch, Stephen Cebik | Vacuum Former | |
| 206 |
Vertical Metal Bandsaw
 |
 |
Quiz: Vertical Metal Band Saw In person checkout required Checkout Checklist 15 Minutes |
Christopher Chalsma, Coleman Merchant, Darryl Bray, Elana Abrams, Jared Crouch, Mara Heneks, Alex Murdoch, Nathan Rawling | Metal Vertical Bandsaw | |
| 207 |
Vinyl Cutter
 |
 ,  |
Quiz: Vinyl Cutter In person checkout required 30 Minutes |
Bob McGonigle, Stephen Cebik, Linda Parsloe | Vinyl Cutter / Plotter | |
| 208 |
Vinyl Cutter
|
, |
Quiz: Vinyl Cutter In person checkout required 30 Minutes |
Bob McGonigle, Stephen Cebik, Linda Parsloe | Vinyl Cutter | |
| 209 |
Vinyl Cutter
|
, |
Quiz: Vinyl Cutter In person checkout required 30 Minutes |
Bob McGonigle, Stephen Cebik, Linda Parsloe | Roland GS-24 Vinyl Cutter/Plotter | |
| 210 |
Vinyl Heat Press
 |
Quiz: Vinyl Heat Press Badge applied after successful quiz |
Vinyl Heat Press | |||
| 211 |
Vinyl Silkscreen Creation
 |
 |
Quiz: Vinyl Silkscreen Creation Badge applied after successful quiz |
|||
| 212 |
Waterjet
 |
 |
Quiz: Waterjet In person checkout required Checkout Checklist 90 Minutes |
Christopher Chalsma, Coleman Merchant, Darryl Bray, Elana Abrams, Jared Crouch, Alex Murdoch, Nathan Rawling | Water Jet Cutter | |
| 213 |
Wire Wheel
 |
 |
Quiz: Wire Wheel In person checkout required Checkout Checklist 5 Minutes |
Christopher Chalsma, Coleman Merchant, Darryl Bray, Elana Abrams, Mara Heneks, Alex Murdoch, Nathan Rawling | Wire Wheel | |
| 214 |
Wood Angle Grinder
 |
A Safety Risk not mentioned in the video is that the metal cutting and grinding discs can explode. It is important to check them for cracks or chips before use (and throw them out if you find any). |
|
Quiz: Angle Grinder In person checkout required 15 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Glenn Mallette, Jorge Alfaro-Murillo, Michael Hanke | Angle Grinder (gone) |
| 215 |
Wood Angle Grinder
|
A Safety Risk not mentioned in the video is that the metal cutting and grinding discs can explode. It is important to check them for cracks or chips before use (and throw them out if you find any). |
|
Quiz: Angle Grinder In person checkout required 15 Minutes |
Jen Fremd, Mike Lockett, Walker Fuchs, Glenn Mallette, Jorge Alfaro-Murillo, Michael Hanke | Woodshop Angle Grinder |
| 216 |
Wood Lathe
 |
 ,  |
Quiz: Wood Lathe In person checkout required 60 Minutes |
Adam Work, Mike Lockett, Walker Fuchs, Jorge Alfaro-Murillo, Glenn Mallette | Wood Lathe | |
| 217 |
Wood Shop Orientation
 |
This video covers the basics of using the Woodshop at MakeHaven, and is a pre-requisite for using the room or any of the tools in it. |
 |
Quiz: Wood Shop Badge applied after successful quiz |
Wood Shop | |
| 218 |
Woodshop Drill Press
 |
Applicable to woodshop drill press |
 |
Quiz: Woodworking Drill Press In person checkout required 10 Minutes |
Jared Crouch, Jen Fremd, Mike Lockett, Walker Fuchs, Glenn Mallette, Adam Work, Jorge Alfaro-Murillo, Michael Hanke | Woodshop Drill Press |
| 219 |
Woodshop Drill Press
|
Applicable to woodshop drill press |
|
Quiz: Woodworking Drill Press In person checkout required 10 Minutes |
Jared Crouch, Jen Fremd, Mike Lockett, Walker Fuchs, Glenn Mallette, Adam Work, Jorge Alfaro-Murillo, Michael Hanke | Large Drill Press |
| 220 |
Woodshop Drill Press
|
Applicable to woodshop drill press |
|
Quiz: Woodworking Drill Press In person checkout required 10 Minutes |
Jared Crouch, Jen Fremd, Mike Lockett, Walker Fuchs, Glenn Mallette, Adam Work, Jorge Alfaro-Murillo, Michael Hanke | Powermatic Drill Press |