32"x 18" ULS Laser Cutter (60 Watt) x2

Primary tabs

We have two of them.  They are CO2 based lasers with 60 watts of power, ULS X-660.

Requirements for Use
Required Badges: 

Laser Cutter

For info on using the Epilog, see https://www.youtube.com/watch?v=4TaAvGx8crc

Watch Video
Pass Quiz
In person checkout required
Facilitator Checkout
Estimated Minutes for Checkout: 
60 Minutes

Check Out With Facilitator

Community Facilitators are volunteers who to advise MakeHaven members on projects and show members how to use the tools.

Facilitator hours will be BY APPOINTMENT during their listed hours. To make an appointment, contact the facilitator directly via Slack. To prevent unnecessary space access during the pandemic, facilitators will not be in the space unless they have an appointment. Note that some facilitators are available only for online virtual appointments at this time. Any questions please email info@makehaven.org.

Community Facilitators are volunteers who to advise MakeHaven members on projects and show members how to use the tools.


Start Time When Member Photo Name / Activity Area
9:00PM Tuesday Apr 2, 9:00pm to Wednesday Apr 3, 12:00am

Darcy Canales

Late Night Badging: Multiple Popular Tools


5:30PM Wednesday Apr 3, 5:30pm to 8:30pm

Stephen Cebik

Laser cutting, Vinyl Cutting, Cooking


Mask preferred

6:00PM Wednesday Apr 3, 6:00pm to 9:00pm

Adam Work

Lasers & Woodworking


Instructions for Use: 

Never leave the laser unattended when running. Be vigilant about fire safety: a CO2 extinguisher is fixed to one of the lasers and is the preferred extinguisher to use. Before use check the lens for dirt (its housing unscrews and you can take it out), a dirty lens can shatter from laser heat, if dirty clean it with the camera lens cleaning kit. Remember to turn on the fan.

Printing from Inkscape
In order to print from Inkscape in the vector format, you need to:

  • Convert any objects (shapes, text, bitmaps) to paths. Convert bitmaps/png/rasters using the Path --> Trace Bitmap. Convert shapes using Path --> Object to Path.
  • You also need your stroke width to 0.02 pixels or less (be sure units on line width are "px" not "in") 
  • Make sure that the stroke color is solid (ex R:255, G:0, B:0, A:255 for a red line)
  • Print from the Extensions--> Export-->Win32 Vector Print. In this screen cut properties can be assigned to colors. You must also select vector for each color (box to the left of each color).
  • It is also sometimes helpful to work in the outline mode when designing very thin vectors. You may go into outline mode by clicking View-->Display Mode-->Outline. Please remember to go back into Normal display mode when you would like to print a raster.

In order to print from Inkscape in the raster format, you need to:

  • Define Fill under Stroke and Fill.
  • Make sure that the fill color is solid (ex R:255, G:0, B:0, A:255 for a red line)
  • Print from the Extensions--> Export-->Win32 Vector Print. In this screen cut properties can be assigned to colors. You must also select raster for each color (box to the left of each color).

In order to print greyscale, print from the File-->Print Dialog box. See more details below.

 

    Tips:

    • Go to File > Document Properties and change Display Units to Inches to make alignment easier
    • If the laser is starting anywhere but the top left corner, click X-Y, and reset the origin to the top left corner
    • If you send a print job and the top is open the laser will not turn on the cutting laser but will show a red dot where it will cut.
    • You can repeat any job by just pushing the green button again (great for multiple passes on a cut).
    • When you are cutting through a material it is best to use a platform that allows air to escape from under the material. You will get cleaner cuts.
    • Be sure any material you are cutting is cut all the way through before moving it, as you will not be able to get it in exactly the same spot again.
    • When cutting make a small notch in your design along the edge of your material. You can use this to test if the cut is all the way through.
    • Use the "skip" fuction for specific colors to avoid recutting areas you do not want to pass over again.
    • Do a fast light vector on paper or cardboard to test placement. If you are engraving glass you can put your peice right over it.
    • Plastics release fumes for several hours. Keep finished pieces in the laser enclosure with exhaust on until it no longer produces smells.
    • Engrave with 70% gray instead of black – gives cleaner image, reduces chipping.
    • When doing a raster of a photo first take it into Gimp and adjust the contrast to maximize the parts of the image you want to emphasize.
    • Be sure to check the advanced tab to be sure there are not settings that mess with your print. 
    • If you find your image is extended or stretched try adjusting the image density slider in the print driver. 5 is a good setting.
    • When printing a raster from the regular print menu in Inkscape remember to go to Document Properties and change the page color from transparent to white. Otherwise you will get a big block of black.

     

    Focusing Information
    This cutter is equipped with the 4.0 Lens and a 2.0 lens, which means its point of Focus is roughly 4" or 2". The 4 has more room to fudge distances, the 2 is a crisper line. We have a 3D Printed focus tool, which should allow you to focus correctly. Just load your piece into the cutter, below the laser head. Place the focus tool on top. While the printer is on, hit the Z button; then use the up and down arrows to move the laser head up and down. Use the Focus Tool the same way you would on the Epilog, the laser head should bump the notch on the tool and push it out of the way. It is now focused. 

    Recomended Settings

    MATERIAL CUT/ENGRAVE POWER PPI SPEED RESULTING DEPTH NOTES
    ACRYLIC - CAST AND EXTRUDED LIGHT RASTER ENGRAVING 22% 500 100% .002"  
    ACRYLIC - CAST AND EXTRUDED DEEP RASTER ENGRAVING 100% 500 90% .010"  
    ACRYLIC - CAST AND EXTRUDED VECTOR ENGRAVING 20%

    1000

    4% .005"  
    ACRYLIC - CAST AND EXTRUDED VECTOR CUTTING 100% 1000 2% .25"  
    DENIM RASTER ENGRAVING 45% 400 100% A bit  
    PAPER VECTOR CUTTING 15% 200 3.2% .02"  
    PLYWOOD VECTOR CUTTING 75% 250 4.8% .125"  
    PLYWOOD RASTER ENGRAVING 50% 250 30% .02"  
    CARDBOARD VECTOR CUTTING 25% 250 4% .125"  
    CARDBOARD VECTOR ENGRAVING 10% 250 4.0% .05"  
    CARDBOARD RASTER ENGRAVING 30% 250 80% .01" Medium dark engraving
    ANODIZED ALUMINUM  RASTER ENGRAVING 30% 500 100% .001"  
    ANODIZED ALUMINUM  VECTOR ENGRAVING 4% 1000 4% .001"  
    GLASS / CRYSTAL  RASTER ENGRAVING 100% 300 30% .001"  
    GLASS / CRYSTAL  VECTOR ENGRAVING 10% 300 7.9% .001"  
    LEATHER  RASTER ENGRAVING 19% 500 100% .001"  
    LEATHER  VECTOR ENGRAVING 3% 500 4% .001"  
    LEATHER  VECTOR CUTTING 50% 200 2.1% .1"  
    RUBBER STAMPS  RASTER ENGRAVING 23% 500 23% .03" Smells really bad. Be sure to let air clear befoe opening. Only used laser safe rubber
    RUBBER STAMPS  PERFORATED VECTOR CUTTING 60% 90 3.1% .04"  
    WOOD  RASTER ENGRAVING 100% 500 25% .02"  
    WOOD  VECTOR ENGRAVING 80% 500 10.1% .03"  
    WOOD  VECTOR CUTTING 50% 250 3.1% .125"  
    Cotton Cloth VECTOR CUTTING 60% 400 8%   Prone to lighting on fire. Must monitor entire time closely. Fire will start on edges or where folded. Fire will also start where path crosses self. 

    More material settings and info on page 47 of the manual
     

    What Material Can Be Laser Cut

    Cutting

    Material

    Max thickness

    Notes

    WARNINGS!

    Many woods

    1/4"

    Avoid oily/resinous woods

    Be very careful about cutting oily woods, or very resinous woods as they also may catch fire.

    Plywood/Composite woods

    1/4"

    These contain glue, and may not laser cut as well as solid wood.

     

    MDF/Engineered woods

    1/4"

    These are okay to use but may experience a higher amount of charring when cut.

     

    Paper, card stock

    thin

    Cuts very well on the laser cutter, and also very quickly.

     

    Cardboard, carton

    thicker

    Cuts well but may catch fire.

    Watch for fire.

    Cork

    1/4"

    Cuts nicely, but the quality of the cut depends on the thickness and quality of the cork. Engineered cork has a lot of glue in it, and may not cut as well.

    Avoid thicker cork.

    Acrylic/Lucite/Plexiglas/PMMA

    1/2"

    Cuts extremely well leaving a beautifully polished edge.

     

    Thin Polycarbonate Sheeting (<1mm)

    <1mm

    Very thin polycarbonate can be cut, but tends to discolor badly. Extremely thin sheets (0.5mm and less) may cut with yellowed/discolored edges. Polycarbonate absorbs IR strongly, and is a poor material to use in the laser cutter.

    Watch for smoking/burning

    Delrin (POM)

    thin

    Delrin comes in a number of shore strengths (hardness) and the harder Delrin tends to work better. Great for gears!

     

    Kapton tape (Polyimide)

    1/16"

    Works well, in thin sheets and strips like tape.

     

    Mylar

    1/16"

    Works well if it's thin. Thick mylar has a tendency to warp, bubble, and curl

    Gold coated mylar will not work.

    Solid Styrene

    1/16"

    Smokes a lot when cut, but can be cut.

    Keep it thin.

    Depron foam

    1/4"

    Used a lot for hobby, RC aircraft, architectural models, and toys. 1/4" cuts nicely, with a smooth edge.

    Must be constantly monitored.

    Gator foam

     

    Foam core gets burned and eaten away compared to the top and bottom hard paper shell.

    Not a fantastic thing to cut, but it can be cut if watched.

    Cloth/felt/hemp/cotton

     

    They all cut well. Our "advanced" laser training class teaches lace-making.

    Not plastic coated or impregnated cloth!

    Leather/Suede

    1/8"

    Leather is very hard to cut, but can be if it's thinner than a belt (call it 1/8"). Our "Advanced" laser training class covers this.

    Real leather only! Not 'pleather' or other imitations!

    Magnetic Sheet

     

    Cuts beautifully

     

    NON-CHLORINE-containing rubber

     

    Fine for cutting.

    Beware chlorine-containing rubber!

    Carbon fiber mats/weave

    that has not had epoxy applied

     

    Can be cut, very slowly.

    You must not cut carbon fiber that has been coated!!

    Coroplast ('corrugated plastic')

    1/4"

    Difficult because of the vertical strips. Three passes at 80% power, 7% speed, and it will be slightly connected still at the bottom from the vertical strips.

     

    Etching

    All the above "cuttable" materials can be etched, in some cases very deeply. In addition, you can etch:

    Material

    Notes

    WARNINGS!

    Glass

    Green seems to work best...looks sandblasted.

    Only FLAT GLASS can be engraved in our cutter. No round or cylindrical items.

    Ceramic tile

       

    Anodized aluminum

    Vaporizes the anodization away.

     

    Painted/coated metals

    Vaporizes the paint away.

     

    Stone, Marble, Granite, Soapstone, Onyx.

    Gets a white "textured" look when etched.

    100% power, 50% speed or less works well for etching.

     

    NEVER LASER THESE MATERIALS

    Material

    DANGER!

    Cause/Consequence

    PVC (Poly Vinyl Chloride)/vinyl/pleather/artificial leather

    Emits pure chlorine gas when cut!

    Don't ever cut this material as it will ruin the optics, cause the metal of the machine to corrode, and ruin the motion control system.

    Thick ( >1mm ) Polycarbonate/Lexan

    Cut very poorly, discolor, catch fire

    Polycarbonate is often found as flat, sheet material. The window of the laser cutter is made of Polycarbonate because polycarbonate strongly absorbs infrared radiation! This is the frequency of light the laser cutter uses to cut materials, so it is very ineffective at cutting polycarbonate. Polycarbonate is a poor choice for laser cutting.

    ABS

    Emits cyanide gas and tends to melt

    ABS does not cut well in a laser cutter. It tends to melt rather than vaporize, and has a higher chance of catching on fire and leaving behind melted gooey deposits on the vector cutting grid. It also does not engrave well (again, tends to melt).

    HDPE/milk bottle plastic

    Catches fire and melts

    It melts. It gets gooey. Don't use it.

    PolyStyrene Foam

    Catches fire

    It catches fire, it melts, and only thin pieces cut. This is the #1 material that causes laser fires!!!

    PolyPropylene Foam

    Catches fire

    Like PolyStyrene, it melts, catches fire, and the melted drops continue to burn and turn into rock-hard drips and pebbles.

    Fiberglass

    Emits fumes

    It's a mix of two materials that cant' be cut. Glass (etch, no cut) and epoxy resin (fumes)

    Coated Carbon Fiber

    Emits noxious fumes

    A mix of two materials. Thin carbon fiber mat can be cut, with some fraying - but not when coated.

     

    Understanding How Raster and Vector Settings Behave

    MENU DRIVER RESULT
    File > Print Raster Prints exactly what you see as Raster (as interprated by settings in advanced tab) Remember it prints the full page so reduce page size in document properties for faster prints.
      Vector Prints Nothing
      Raster /Vector Prints exactly what you see as Raster (as interprated by settings in advanced tab)
    Extensions > Export > Win 32 Vector Print Raster Prints as raster only lines that have thickness above .200px
      Vector Cuts all lines at .200px or less
      Raster / Vector First does raster of any fill of your vector art, then does cuts of lines under .200px

    Burning a Photo to Wood

    To burn a photo or anything with grey scale you need to go to the Advanced tab on the printer driver window. Here you can choose to do HalfTone or Error Defusion for the grey scale. The rule of thumb is that you should use Error Defusion on rough surfaces and HalfTone on smooth surfaces. It is also best to play with the contrast in another program before printing, the more contrast and sharpness the better. There is a great description of the technical asspects of this process at: http://www.slideshare.net/MikeClarke1/working-with-photo-graphs-on-your-laser-in-coreldraw

    Remember: When printing a raster from the regular print menu in Inkscape and remember to go to Document Properties and change the page color from transparent to white. Otherwise you will get a big block of black.

     

    Additional materials can be found at: https://drive.google.com/drive/folders/0B5HW3m6TFEyDaHpPSS1PeV9iRTQ?resourcekey=0-2BbBAU8pQm0VFTKeKcHbLA&usp=sharing

    Even More Materials at: http://www.engraversnetwork.com/support/universal-lasers/service-tos/

     

    Additional Resources

    http://fab.cba.mit.edu/content/tools/universal_laser/

     

    Repair Notes

    If it randomly stops working two things to check:

    USB Spot - It uses a virtual usb port so if it is unpluged from a port and put in another the computer can get confused about what usb to use. Try other ports, or reinstalling driver.

    Random Setting Reset - From time to time it will forget the settings in firmware. It then defaults to serial as the communication. You need to go into settings and change the preference to "parallel".

     

    Max bed cutting size: 30" x 18"

     

    Replacing Lens.

    Lens are .75 or 19.05mm in Diameter.

    Lens should be mounted using Loctite 409.

     

    Tips for installing lens.

    Alternative Lens Glue Material (Sugru)

    Video Instructions for lens change

     

    Item Area Interest: 
    Item Hazard Band: 
    Hazard Class 1 - Minor injuries, addressable with basic first aid kit or ice.
    Status: 
    Associated Slack Channel : 
    laser-cutting

    Materials for Sale

    Custom text
    Laserable Rubber Square Inch Please try to leave as much usable area. Use sheets that have already had cutouts first. $0.50 per per square inch Add to cart
    Laserable Rubber Sheet Laser-safe rubber for stamps $25.00 per Sheet Add to cart
    Laserable plywood, 12" x 24, 1/8" thickness Sheets of plywood, 12" x 24, 1/8" thickness $9.00 per sheet Add to cart
    Laserable plywood, 12" x 12, 1/8" thickness Laserable plywood, 12" x 12", 1/8" thickness -- HALF SHEET OF LASERABLE WOOD, You will need to laser in half in there aren't half... $6.00 per 1/2 sheet Add to cart
    Laser Safe Adhesive Vinyl (PVC-Free) -- per linear inch This is the only adhesive vinyl that is safe for use on the lasers. It can be lasered or cut in the vinyl cutter. $0.65 per Linear inch Add to cart
    Laser Safe Adhesive Vinyl (PVC-Free) -- FULL SHEET (24" x 36") This is the only adhesive vinyl that is safe for use on the lasers. It can be lasered or cut in the vinyl cutter. $20.00 per 24 x 36" sheet Add to cart
    Large Acrylic Sheet (Clear w blue protection) 0.060 $12.00 per 21.25"x30.25" Sheet Add to cart
    High Impact Polystyrene (white) .030 or .020 - Food Safe $6.00 per 21.25"x30.25" Sheet Add to cart
    Cast Acrylic Sheet, Clear, 12" x 12" x 0.118" $8.00 per Square Sheet Add to cart
    Acrylic Sheet (12 in × 24 in) Cast sheets in various colors good for use in laser cutters $18.00 per Sheet Add to cart

    Related Projects

    Related Resources

    Open Tasks You Can Do.