Machine Shop

The surface grinder is used to grind ferrous materials to very precise dimensions.

This tool uses 30,000psi water and abrasive to cut material. The software can be downloaded from the following link to practice on your own computer: https://drive.google.com/file/d/1d0uxcU-BHsDxQ9PbGXWpXdrOoIMYQBlR/view?u... . To activate the software, click the red Register button, post the code on #waterjet on Slack, and an admin will send you the registration code.

The cutting area of the waterjet is 57"x30".

This tool is for cutting metal stock to length. It can cut materials mild steel and softer, and it has an automatic feed to make multiple cuts of the same lengths.

The Wire Wheel uses spinning wire brushes and scotchbrite to deburr, de-rust, and clean parts without removing much metal.

• See videos created by the manufacture
• See example projects
• Simulate using the mill interface.

This is a 20 ton manual hydraulic press.

This tool is used to make sure that bicycle wheels are true - all the spokes are balanced and there is no wobble.