Badges

This tool consists of a heating element, which heats a sheet of plastic in a line, allowing it to be bent on that line.

There is a thermostat on the bottom, but it doesn't change…

This badge is required to use the Tormach PCNC 440.

Unlike many other badges this can't be learned in a single session. 

To earn this badge your options are:

1. Earn both the…

Makers interested in joining this community must be 21 years or older and have attended a beer brewing session at MakeHaven, or have plans to attend soon. As part of the brewing…

Members, Login to upload documentation. 

This badge requires review and undersanding of the Community Bio Room Policies.

This is a Deltronic DH 216 Optical Comparator.

This badge is appropriate for metalwork only. 

Ceramics requires the ceramics kiln badge.

This badge is required for using tools in the Fine Woodworking Cabinet. The Tormek badge is also required, so that users can keep the tools sharp.

Prerequisites for Gerber CNC Badging:

1. Prior Experience Required: Before getting certified for the Gerber, members must:
   • Be already badged and experienced on the Shapeoko.
   • Have…

The Rotary Hammer Drill is used to drill into stone, concrete, and brick. It uses SDS-Plus bits (located in the container next to the drill), which have a carbide tip. This tip is…

This badge is required to use the Jewelry Area. Within the Jewelry Area there are a few other badges, including the Flex-Shaft, Vacuum Casting Machine, and Wax Work.

Intro to…

This badge is for the pneumatic hand tools in the metal shop

This badge allows you to operate the large popcorn machine.

The primary safety concerns with this tool are the following:

-Burns from the oven. There are multiple heating elements in this oven, including the platten. Be careful about…

1. Maximum tank pressure of 80 psi. The safety relief valve is designed to protect the tank against excessive pressures. DO NOT attempt to make adjustments to this valve. If this…

Completing this badge allows you to use the Prusa 3D printers. Additional training is required for use of the Markforged and Form Labs 3D printers.

Learn to use the quilter! Don't panic at the number of videos. These are short, instructional pieces outlining steps. The total of the videos is just over a half hour.

To get this badge, you must already have your FCC Radio License (Technician or higher). If you have this, you can take the quiz and schedule an appointment to get checked out to…

Badge required to use the silkscreen screen burning unit in the printmaking area.

This badge covers the process of making screens as well as how to screen print.

Badge for classic heavy duty Singer sewing machines

Required to use the Shapeoko Mill

Quick Notes:

• Functional working surface = 33” X, 33” Y, 4” Z travel
• Accepts bits with 1/4” & 1/8” collet
• Not web based like old model, you…

Has learned best practices for soldering and practiced hands on soldering..

This badge allows you to use the tabletop printmaking setup with water-based (eg acrylic) inks. 

Learn to use the tufting guns to make a customized rug.

Read the manual.

A Safety Risk not mentioned in the video is that the metal cutting and grinding discs can explode. It is important to check them for cracks or chips before use (and throw them out…

This video covers the basics of using the Woodshop at MakeHaven, and is a pre-requisite for using the room or any of the tools in it.

Applicable to woodshop drill press